User Manual

16
LASER
2
Complies with IEC / BS EN 60825-1 (2014) and 21 CFR
1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007
Wavelength: 655nm
Max Average Power: 0.634 mW
IEC / EN 60825-1:2014
Manufacturers Name:
Manufacturers Address:
Location of Manufacture:
Date of Manufacture:
Serial Number:
Aston Microphones Ltd
3 Hunting Gate, Hitchin SG4 0TJ
United Kingdom
CAUTION
Though the laser is of a very low power, the following precautions
should be observed. Never aim a laser into the eyes or stare
directly into the beam and only activate the laser while setting
up the microphone position. Check that nobody is in the path of
the laser before switching it on. When working outdoors, ensure
that the laser is never aimed into the ightpath of aircraft or
into the audience. Use of controls or adjustments or perfor-
mance of procedures other than those specied herein may
result in hazardous radiation exposure.
Laser Voice Cut dB
-20 0 -10