Installation Guide

The whirlpool bath is constructed with several leveling feet. Each foot has a

locking nut. Use an adjustable wrench and level to complete this next step.

1. Loosen all of the locking nuts so that the leveling feet are free and easy to

move.

2. Place the whirlpool bath into the exact final installation location or a flat

surface.

3. Place the level across the top of the whirlpool bath (side to side) and level the

whirlpool bath by adjusting the leveling feet.

NOTE: You may need to remove the whirlpool bath in order to adjust the leveling

feet, but always recheck the level with the unit in the final installation location.

4. Place the level across the top of the base (front to back) and level the base

by adjusting the leveling feet.

Level the whirlpool bath

for proper drainage