Assembly Instructions Tools Required for Assembly: ASSEMBLY RATING ·Assembly Rating is a 5-point system that '/liS the degree of effort needed in ambling a specific product (with 1 being V and 5 being difficult). For some lucts, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FUR NITURE TO LAST, CORRECT ASS EMBLY AND PROPER MAINTENANCE ARE NECE SSARY. PLEASE FOLLOW THE INF ORMATION PROVIDED BELOW TO FULLY ENJOY YO UR FURNITURE . BASIC ASSEMBLY TECHNIQUES \M1en lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger fiat washer and the head of th e screw or boll.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
Turn right (clockwise) to tighten #F #Ax 4 pes L...-....I .... #D x 4pcs #E x 4 pes ...--"1/ I. II. III. Align the seat (#2) with the pre-drilled holes of the backrest with legs (#1). Prepare 4 bolt assemblies by inserting FIRST the lock washer (#D) onto the bolt (#A) and then the flat washer (#E) onto the SAME bolt (#A), in that order.
#8 x 4 pes '---', #D x 4pes ,.-..., .... #E x 4 pes I. II. III. #3 #2 Align the front legs (#3) with the pre-drilled holes on the corners of the seat (#2). Prepare 4 bolt assemblies by inserting FIRST the lock washer (#0) onto the bolt (#8) and then the flat washer (#E) onto the SAME bolt (#8), in that order. Insert the bolt assemblies through the pre-drilled holes in the corners of the seat (#2) and secure those bolts using the Allen wrench (#F) to lock them in with the front legs (#3). . .....~.