Installation & Assembly

I.
II.
III.
Align the front legs (#3) with
the
pre-drilled holes on the
corners
of the seat (#2).
Prepare 4
bolt assemblies by
inserting
FIRST the lock
washer (#0) onto the bolt
(#8) and then the flat washer
(#E) onto the SAME
bolt
(#8), in that order.
Insert the bolt assemblies
through the pre-drilled holes
in the corners of the seat (#2)
and secure those
bolts using
the
Allen wrench (#F) to lock
them in with the front legs
(#3).
#8 x 4 pes
#D x 4pes
#E x 4 pes
#3
'---',
,.-..., ....
#2
<:.
. ..... ~ . ~ ~ -
#o / A
:: :)
Tu rn r ig ht (clockwise) to ti ghten
Carefully turn the completed chair upright. Make sure the chair
is rested on a flat surface and it does not feel loose or wobbly.
If
it does, double check that the bolts are secured and properly
tighten.
ASSEM8LE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR.
Page 5 of 5