Installation & Assembly

3of7
STEP 1 Remove Glass Frame from Fixture
Hood
-
A. Prior to assembly, remove the Glass Frame from the
Fixture Hood by unscrewing the Hex Coupling. Remove
the packaging material inside of the Glass Frame.
Fixture Body
Fixture
Hood
Hex
Coupling
Frame
Figure 1
Figure 2
Crossbar
Mounting
Screw
Lock Washer
Hex Nut
Fixture
Body
STEP 2 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the backplate of the Fixture Body (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten
until snug.
STEP 3 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Crossbar
Outlet
Box
Outlet Box
Screw
Mounting
Hole
Figure 3
Assembly Instruction