Installation & Assembly

5of7

STEP 6 - Attach Fixture Body to Mounting

Screw

A. Place the backplate of the Fixture Body (G) over the

Mounting Screws (B) and secure with Mounting Balls

(E). Hand tighten until snug.

Mounting Screw

Mounting Ball

Backplate

Figure 7

STEP 7 Install Bulb-

A. This fixture uses standard bulb with a candelabra screw

base. Maximum 60 watts.

B. Insert bulb and screw snugly into place.

Figure 8

Socket

Bulb

STEP 8 Attach Glass-

A. Slip Large Glass Panels (H) and Small Glass Panels

(K) inside of the Fixture Frame as shown. Locate Long

Tabs (J) onto the top edge of the Large Glass Panels

(H) and locate Short Tabs (L) onto the top edge of the

Small Glass Panels (K). Line up holes on Tabs onto

Mounting Holes in the Fixture Frame. Thread Lock

Screws (I) into mounting holes and hand tighten until

snug to secure the Glass Panels.

Figure 9

Large

Glass Panel

Loog Tab

Lock Screw

Small

Glass Panel

Short Tab

Assembly Instruction