Installation & Assembly

I. Carefully place the table top (#1) facing down on a protected surface. Align the
legs (#2) with the pre-drilled holes on the bottom corners of the table top (#1).
II. Prepare 8 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt
(#A) and then the flat washer (#C) onto the SAME bolt (#A), in that order.
III. Insert the bolt assemblies through the pre-drilled holes on the bottom corners of
the table top (#1) and secure those bolts using the Allen wrench (#D) to lock them
with the legs (#2).
IV. Carefully turn the completed table upright. Make sure the table is rested on a flat
surface and it does not feel loose or wobbly. If it does, double check that the bolts
are secured and properly tighten.
Turn right (clockwise) to tighten
Page 4 of 4
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
ASSEMBLY IS COMPLETED