Operating instructions

E- Series Chlorinator M20 CSD & M25 CSD V05_10
2
INDEX
1.0 Introduction…………………………………………………………………………………………………. 3
2.0 Installation…………………………………………………………………………………………………... 3
2.1 Mounting the Controller……………………………………………………………………… 4
2.2 Connecting the PVC Acid Tube……………………………………………………………….. 4
…………………………………………………………………………………………………….. 5
3.0 Starting your Chlorinator……………………………………………………………………………………. 6
3.1 Set Up………………………………………………………………………….…………………………….. 6
3.2 Setting Timers………………………………………………………………………………………………... 6
3.3 Timer Recommendations…………………………………………………………………………………… 7
4.0 Operating Functions Accessed through Maintenance Program………………………………………… 7
5.0 Calibration of pH sensor/probe……………………………………………………………………………... 8
6.0 Operation………………………………………………………………………………………………………. 9
6.1 Adjusting Chlorine Output……………………………………………………………………………………. 9
6.2 Adjusting pH Set Point………………………………………………………………………………………. 10
7.0 General Operation/Pool Chemistry…………………………………………………………………………. 10
7.1 Setting the right Chlorine output and Operation times…………………………………………… 10
7.2 Stabiliser………………………………………………………………………………………………. 10
7.3 pH Level………………………………………………………………………………………………. 10
7.4 Total Alkalinity……………………………………………………………………………………….. 10
7.5 Salt Level…………………………………………………………………………………………….. 11
7.6 Acid Handling………………………………………………………………………………………… 11
7.7 Cell Cleaning…………………………………………………………………………………………. 11
8.0 Maintenance of pH sensing and dosing……………………………………………………………………. 12
9.0 Fault indication and troubleshooting………………………………………………………………………… 13
10.0 Warranty……………………………………………………………………………………………………… 14