Operating instructions

E- Series Chlorinator M20 CSD & M25 CSD V05_10
6
3.0 STARTING YOUR CHLORINATOR
Your Chlorinator Controller operation can be divided into 4 areas;
a. MAINTENANCE – selects specialised functions of your chlorinator and initial set up of Chlorinator to suit
your pool and spa.
b. SET – selects changes in Chlorine Product and pH of your pool and spa water
c. CLOCK & TIMER buttons – sets current time and filtration, chlorine production and pH monitoring and
adjustment times from Monday to Friday and Weekends
d. Pool and Spa Mode – Allows selection of pool mode where controller will produce chlorine suitable for pool
and Spa Mode, where chlorine production and acid dosing is reduced to suit a smaller volume of water in
the Spa.
3.1 SET UP
a. Press “Pool Mode” button until Manually Off appears and then Press “Clock” Button
b. Select “Day” and use buttons adjacent to LCD screen to set the current day, hour and minute. The clock
is a 24 hour clock.
3.2 SETTING TIMERS
Your E Series CSD Chlorinator has 2 timers enabling you to set two different periods in which your filtration pump,
acid and chlorine production will operate. Different periods can be set for the weekend compared to weekdays.
Timers are set by entering a start time, and a RUN time for how long you want to operate (i.e. Mon – Fri T1 Start
14:00 and Mon – Fri T1 Run 6:00 will run the chlorinator/pump during weekdays from 14:00 for 6.00 hours).
To set timers, do the following:
a. Press the TIMER button.
b. Press HOUR button to set the hour for the timer selected and use the Up/Down arrows to change the time.
c. Press MIN button to select the minutes for the timer selected and use the Up/Down arrows to change the
time. Press the NEXT button to select the RUN time or another time and set as required. Note: The
RUN time represents the number of hours you want the unit to operate for.
d. When finished, press the NEXT button a number of times to scroll through the other times until you return
to normal display. This saves your new settings.
e. Select Auto Sanitising by pressing the POOL mode button. The POOL mode button has three settings,
manually ON which turns on system indefinitely, manually OFF which turns system off indefinitely, and
AUTO model which sets the controller on timer clock mode. In AUTO mode the LCD screen will display
the date and pool sanitiser message.
DAY: WEDNESDAY
TIME: 11:07
DAY HOUR MIN
Clock
Up & down buttons
Timer
Select Day and use up & down buttons to change day. Select hour and use up or
down buttons to change hour. Select Min and use up or down buttons to change the
minute