Operating instructions

E- Series Chlorinator M20 CSD & M25 CSD V05_10
9
6.0 OPERATION
During operation, adjustments are made by the SET button.
6.1 ADJUSTING CHLORINE OUTPUT
Press the SET button to change the chlorine output and the pH of your Pool
Press YES to change the output
Use the up and down buttons to change the Set Point between 0 and 8. 0 chlorine output should only be used
when there is no salt in the water. In summer, the chlorine should be set between 6 and 8 and you should
regularly check your chlorine level in your swimming pool to determine if the output should be increased or
decreased. Rely on your pool professional for advice on the recommended chlorine level in your pool.
As a guide the free chlorine level should be between 1.0 ppm and 3.0 ppm.
SET POINT
6
ACCEPT
CHANGE CHLORINE
SET POINT
YES NO
WEDNESDAY 16:05
POOL SANITISING ON
UNIT 20:00
SET MAINT
Clock
Timer
Clock
Timer
Clock
Timer