Operating instructions

Inst305 - Viron Series Chlorinator Instructions V08_12
6
3.2 SETTING TIMERS
Your Viron Series chlorinator has 4 timers per day enabling you to set different periods in which your filtration
pump, pH control and chlorine production will operate. Timers are set by entering a start time, and a RUN time for
how long you want to operate. To set timers, do the following:
a. Press the TIMER button.
b. Press HOUR button to set the hour for the timer selected and use the Up/Down arrows to change the time.
c. Press MIN button to select the minutes for the timer selected and use the Up/Down arrows to change the
time. Press the NEXT button to select the RUN time or another time and set as required. Note: The
RUN time represents the number of hours you want the unit to operate for.
d. When finished, press the NEXT button a number of times to scroll through the other times until you return
to normal display. This saves your new settings.
e. Select Auto Sanitising by pressing the POOL mode button. The POOL mode button has three settings,
manually ON which turns on system indefinitely, manually OFF which turns system off indefinitely, and
AUTO model which sets the controller on timer clock mode. In AUTO mode the LCD screen will display
the date and pool sanitiser message.
3.3 TIMER RECOMMENDATIONS:
AstralPool recommend that you use two timers, one for the morning and one for the evening and typically for
periods of 2-5 hours for each. Your Viron Series chlorinator is most effective if running in the early morning or
evening when it is cooler (strong sunlight consumes more chlorine). As a default, the control is set to come on at
08:00 hours and 16:00 hours both for periods of 4 hours.
POOL SANITISING OFF
UNTIL 16:00
SET MAINT
Clock
Timer