Operating instructions

Inst.241a Viron Series Pool & Spa Heater V08.11
20
Maintenance of your heater
Maintenance Schedule: You new product incorporates moving parts and withstands high velocity water
with chemicals in it. Some of these parts will wear in the normal course of use and require regular checks
and maintenance. Performing these checks and maintenance will identify parts that have worn and
require repair/replacement before further serious damage is sustained. A small amount of regular care
and attention to your pool equipment will help ensure long life and trouble free performance.
Timing
Maintenance Check
Service action (if required)
Monthly
Operate heater for 15 min to clear
residues and ensure correct operation
Start circulation pump and turn heater
on, leaving to run for a few minutes. This
will clear flue passages and keep
components working properly
Three Monthly
Check inlet/outlet o’rings for leaks
Isolate Pump, turn power off, clean and
grease O rings or replace if necessary
Three Monthly
Check surroundings for leaves, debris
and flooding
Remove debris from around the base of
the hearer and rectify if any flooding.
Clear vegetation from around the flue
Annually
Check gas pressures
Call Service technician to perform annual
gas checks and routine maintenance
Important note: Regular maintenance is important to ensure long life and trouble free performance of your pool
equipment. If unable to perform the maintenance yourself, contact your local AstralPool office who will arrange a
trained service technician to perform the maintenance for you.
Record your Equipment details here for quick reference:
Model No.: ____________________________
Serial No.: ____________________________