RPX Robotic Pool Cleaner Installation and Operating Instructions Product 11714 Product Inst 323
Dear Customer, Thank you for choosing our product to clean your pool. We hope that you will enjoy using your new robot to maintain your swimming pool for years to come. Before you begin to use your robot, please take a few minutes to carefully read these operating instructions. Again, thank you for choosing our product.
Operating the pool cleaner 1. Place the power supply (transformer) at least 3.6 meters / 11.8 feet from the pool and at least 12 cm / 4 Inch above the surface (fig.1). The transformer will supply low voltage to the cleaner. 2. Uncoil the cable.(fig.1a) 4. Place the unit in the water. Turn the unit side to side in the water to allow air to escape from the body and then let the cleaner sink to the bottom of the pool (fig.3). Then, spread the cable over the surface of the pool as evenly as possible (fig.1).
2SHUDWLQJ WKH SRRO FOHDQHU *URXQGLQJ 7KH SRZHU VXSSO\ PXVW EH FRQQHFWHG WR D JURXQGHG FRQGXFWRU VRFNHW 7KH PDLQV SRZHU VXSSO\ PXVW EH FRQQHFWHG YLD D *)&, JURXQG IDXOW FLUFXLW LQWHUUXSWHU RU 5&' UHVLGXDO FXUUHQW GHYLFH KDYLQJ D UDWHG UHVLGXDO RSHUDWLQJ FXUUHQW QRW JUHDWHU WKDQ P$ )XVH 7KH IXVH PXVW EH FKDQJHG E\ DQ DXWKRUL]HG VHUYLFH DJHQW RU WUDLQHG DQG TXDOLILHG SHUVRQ RQO\ )RU FRQWLQXHG SURWHFWLRQ DJDLQVW ULVN RI ILUH UHSODFH RQO\ ZLWK WKH VDPH W\SH DQG UDWLQJ RI IXVH 0DLQWHQDQFH DQG VDIH
Operating the pool cleaner and power supply a. Power LED The blue LED flashes when the power supply is in standby mode and lights continuously when the pool cleaner is operating.The power button switches between ON and STANDBY b. "POWER" button The button switches between "ON" and "STANDBY". IMPORTANT- After every cycle the pool cleaner will automatically go to "standby".
Model 400 - Aquacontrol Super Remote Auto detect Pool shape Swivel Cleaning Program Internal timer Check filter PROGRAM 03 96h HIGH PROGRAM 02 72h NORMAL PROGRAM 01 48h 7 External timer 1 1 2 3 4 5 6 1. Auto detect: this feature prevents the robot from getting stuck on obstacles in the pool such as main drains, steps, ladders etc. Press this button to choose one of the following options: Auto-Detect - OFF.
Aquacontrol Power Supply Specifications Physical Dimensions (W * D * H) Weight Electrical Input rating Output rating Storage temperature Operating temperature Ingress protection Maintenance and adjustment CAUTION: To avoid scratches and other blemishes appearing on your robot, simply find a smooth surface for it to rest on when cleaning the debris bag or performing minor adjustments.
Maintenance and adjustment CLEAN THE FILTER BAG AFTER EVERY CLEANING CYCLE smooth surface a. Unplug the power supply. (Please keep the plug away from contact with water) b. If the unit is in the pool, gently pull the cleaner toward you using the cable until the handle is within reach. Use the handle (not the cable) to pull the cleaner out of the pool after allowing most of the water to drain from the unit. c.
Maintenance and adjustment Filter bag Screws 30°C / 85°F outlet top propeller label (continued from the previous page) d. Remove the filter bag from the support bars, turn it inside out and wash off all the dirt with a garden hose or in a sink. Squeeze the bag gently until the rinse water is clear. If necessary, machine wash the bag using only cold water with NO DETERGENT! (fig.5) e. Re-install the bag on the support bars with the label in the center of one of the long sides of the bottom lid (5a) f.
Operating the Wireless Remote Control Wireless Remote Control - R/C Model NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Operating the Wireless Remote Control USING THE REMOTE CONTROL The Remote Control Model is provided with a radio control transmitter. This feature will enable you to directly guide the robot to any part of the pool. Pressing the Right or Left buttons causes the robot to turn until the button is released. Pressing the Forward/Reverse button once causes the robot to stop and reverse its direction of travel.
Operating the Wireless Remote Control REPLACING THE BATTERY 3 The battery installed in the remote control can last several years. If the battery needs replacing, the red light on the remote control unit will not flash when a button is pressed. 1 2 1 3 4 5 4 6 To replace the battery: 1. Unscrew the 6 screws securing the back cover of the unit using a 1 Philips screwdriver. 2. Remove the battery and dispose of safely. 3. Replace it with a size ½ AA 3.6V lithium battery (type 14250).
Caddy Installation 1 Parts 2 1. Caddy handle 2. Handle screws 3. Body screws 4. Caddy body 3 Installation Instructions 1. INSTALL THE ENTIRE CADDY HANDLE using the two handle screws (2) as is shown in the picture. 4 2. INSERT THE CADDY HANDLE into the caddy body special place and fix it with three body screws (3) as is shown in the picture.
Troubleshooting Guide PLEASE CHECK THE FOLLOWING BEFORE CALLING YOUR SERVICE CENTER Before troubleshooting, the pool cleaner must be disconnected from the power supply and the power supply must be unplugged from the electrical outlet to prevent damage to the unit and possible personal injury. For reference numbers, consult the parts list diagram located on the last page of the instructions. 1. Unit does not pump water or move: a) Check to see if electric outlet (22) has power.
2SHUDWLQJ WKH SRRO FOHDQHU 3DUWV /LVW 2XWOHW 7RS DQG SURSHOOHU 3XPS 0RWRU 'ULYH 0RWRU +DQGOH /RFNLQJ %UDFNHW 3XOOH\ $VVHPEO\ 'ULYH %HOW 'ULYH 7UDFN %RG\ $VVHPEO\ )LOWHU 6FUHHQ 6LGH 3ODWH 39$ %UXVKHV )LOWHU %DJ %RWWRP /LG $VVHPEO\ +DQGOH $VVHPEO\ &DEOH $VVHPEO\ 3RZHU 6XSSO\ 7UDQVIRUPHU 7UDQVIRUPHU 6RFNHW :KHHO 7XEH $VVHPEO\ ³2))´ EXWWRQ /(' ³21´ EXWWRQ 3RZHU &RUG 2XWOH
WARRANTY TERMS AND CONDITIONS Astral Pool Australia Pty Ltd (ABN 97 007 284 504) ("Astral Pool") provides the following warranty in relation to its Robotic Pool Cleaners. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
WARRANTY CLAIMS 1.If a fault covered by warranty occurs, the customer must first contact AstralPool at the contact address listed below, or an Authorised AstralPool Service Agent. 2. Any warranty claim must be accompanied by: (a) proof of purchase; (b) full details of the alleged defect; and (c) appropriate documentation (such as historical and maintenance records). 3. The customer must make the Product available to AstralPool or its Authorised AstralPool Service Agent for inspection and testing.
EXCLUSIONS AND LIMITATIONS EXCLUSIONS The warranty will not apply where: (a) the customer is in breach of the Terms and Conditions of Sale; (b) the Product was used for a purpose other than one it was intended for; (c) the Product was repaired, modified or altered by any person other than AstralPool; (d) the Product has not been installed, maintained and/or operated in complete compliance with the installation and operating instructions and any instructions by AstralPool; (e) the Product has been subject t
Melbourne 39-45 Cyber Loop Dandenong VIC 3175 P: 03 8796 8600 Townsville 17 Auscan Crescent Garbutt QLD 4814 P: 07 4796 0100 Sydney Seven Hills 2/2 Welder Road Seven Hills NSW 2147 P: 02 9853 2100 Sydney Moorebank 6/30 Heathcote Road Moorebank NSW 2170 P: 02 8778 9500 Adelaide 13 William Street Mile End South SA 5031 P: 08 8152 7600 Brisbane 1/27 Millenium Place Tingalpa QLD 4173 P: 07 3308 5400 Perth 97 Sheffield Road Welshpool WA 6106 P: 08 9350 2600 Gold Coast 1/28 Export Drive Molendinar QLD 4214
