Operating Instructions and Installation Instructions

PROGRAM
02
PROGRAM
03
PROGRAM
01
HIGH
NORMAL
96h
48h
72h
Cleaning
Program
Internal timer
External timer
Swivel
Auto detect
Pool shape
Check filter
4. Cleaning program selection:
Program 01 – 1.5 hour floor only cleaning program
Program 02 – 2 hour floor and wall cleaning.
Program 03 – 2.5 hour floor and wall cleaning.
5. Internal timer - Automatic operation option:
Every 48 hours
Every 72 hours
Every 96 hours
2. Swivel – adjust the robots rate of turns in the pool.
Normal – Standard operation
High – Different rate of turns
Auto-Detect - OFF. This option should be selected if you see your pool cleaner changing direction in the middle of the pool without making contact with any obstacles.
Auto-Detect - ON. The pool cleaner should change direction when making contact with certain obstacles. Choose this option when the pool has obstacles such as in-
floor cleaning systems, main drains, and ladders.
1. Auto detect: this feature prevents the robot from getting stuck on obstacles in the pool such as main drains, steps, ladders etc. Press this button to choose one of the
following options:
3. Pool shape:
Allows the robot to calculate the most efficient cleaning pattern for the pool shape chosen. Press the button to select the drawing most suitable to the shape of the pool. A
red light will indicate your selection.
7. Check filter
– Illuminated light means the filter bag must be removed, cleaned and properly installed back into the robot to work efficiently.
2
3
4
1
5 6
7
Model 400 - Aquacontrol Super Remote
6
2
3
4
1
5
6
7
6. External timer –
This feature gives the option to the end user to program the cleaning schedule through an external timer (sold separately). Pressing this button enables and disables this
feature.