Troubleshooting guide

SECTION 3
OPERATING THE ASTROJET M1
22
Printing a Typical Job on 8.5-inch by 5.5-inch Paper
The AstroJet M1 can print edge-to-edge on an 8.5" x 5.5" document.
Follow these steps to set up a job:
1. Go to File, then Page Setup and select 0" margins.
2. Select the Paper tab, select Paper Size “Custom size” then
set the paper Width to 8.5" and the paper Height to 5.5".
Then click OK.
3. The screen at right is an example of
a job to be printed. Once the job is
ready for printing, select Print from
the File menu and print the job.
For more information about changes that
can be made in the Driver please see the
Printer Driver section.