Troubleshooting guide

SECTION 3
OPERATING THE ASTROJET M1
25
Services Tab
Services allows you to:
 Print Configuration Page – Prints out the
current configuration of the Printer including
current Firmware Version, Network
Connection, printer Serial Number and more.
 Print Sample Page – Prints type and color
bands to check print quality.
 Print Diagnostic Page – Shows basic Printer
information, memory, Network Settings, Event
Log and RAM partitions.
 Release the Printhead – Performs the same
task as the Cover Release button on the Printer.
Deprimes the ink from the system and opens
the Printhead Cover for removing/installing the
Printhead Cartridge.
 System Deprime – Drains the ink in the lines
back into the Ink Tanks before servicing the
Printhead Cartridge or prepping the Printer for
storage or transport.
 Circulate Ink – Purges air from the ink lines and primes the system after replacing the Printhead
Cartridge and/or the Ink Tanks.
 User Maintenance, Levels 1 to 3
Level 1 – Circulates ink, wipes and cleans the Printhead Cartridge.
Level 2 – Runs cleaning and wiping routine twice for better flushing and cleaning.
Level 3 – Runs the cleaning routine multiple times for the most thorough flushing and cleaning of
the printhead.
NOTE: If the Printer is connected to a network and the Driver buttons fail to activate the
cleaning process, you can perform the same functions from the Toolbox User Interface.
 If you are connected to the Internet you can also order supplies and get help with Printer questions.