Troubleshooting guide

SECTION 4

MAINTENANCE

3. Slide the Service Station out of the Service Station port.

NOTE: Do not pull Station all the way out until you

disconnect the Ribbon Cable.

4. Disconnect the Ribbon Cable. Slide the Latch open on

the Service Station Circuit Board to release the Ribbon

Cable. Remove the Service Station.

Remove the Ink Tanks

1. Turn the Printer OFF with the Control

Panel Power Button and open the Front

Cover (hinged at bottom). Unlatch the

three Locks [A] and pull the Ink Tank(s)

out of the Printer.

2. Carefully package the Ink Tanks in the

original packaging.

IMPORTANT: Make sure the ink seals

on the Ink Tanks are facing up to prevent

leakage.