Troubleshooting guide

SECTION 2
INSTALLING THE PRINTER
5
SECTION 2 – Installing the Printer
Contents of Packaging
1.
M1 Printer
2.
Ink Tanks – Cyan, Magenta, Yellow, Black, Black
3.
Printhead Cartridge
4.
Media Side Guides: Registration (Fixed) and Adjustable –
mounting screws attached to Printer
5.
Rear Media Support Guide
– thumbscrew attached to Printer
6.
Media Support Wedges: Narrow and Wide
– mounting hardware attached to Rear Media Support Guide
7.
Envelope Printing Attachment
(Use when printing large volume envelope jobs)
8.
AC Power Cord
9.
USB Cable
10.
Operator Manual
11.
Driver Software CD
Before using the AstroJet M1 Printer the following must be done:
 Choose a location for the Printer
 Unpack and assemble the Printer
 Hydrate the Printhead Cartridge
 Remove the Service Station Transport Tab
 Plug in the Printer and connect it to the computer
 Install the Printer Driver
 Install the Ink Tanks
 Install the Printhead
 Set up the feed on the Printer
Choose a Location
The AstroJet M1 should be placed on a sturdy level worktable or cabinet at least 9 inches from any
walls. Protect the Printer from excessive heat, dust, and moisture. Avoid placing it in direct sunlight.
Unpacking and Setup
Remove the Printer and its parts from the carton. Remove all packing tape. The screws that attach the
various parts of the guides to the Printer are under the tape in their respective positions.