Troubleshooting guide

SECTION 4

MAINTENANCE

2. Make sure the Printhead Latch is fully opened to retract the ink lines. Remove the Printhead

Cartridge by tilting it toward the ink lines [3], then carefully lift it out of the Printhead

Compartment.

3. Pack the Printhead Cartridge area with absorbent towels to catch any ink drips or spills. Carefully

pack the Cartridge using the original packaging.

Remove the Service Station

1. Open the Front Cover (hinged at

bottom). Open the Top Cover.

Release the two latches and open the Print

Engine Clamshell. The Service Station will

not fully eject with the Clamshell closed.

2. Open the Printer Toolbox. Click “Eject

Service Station”. Once the Printer

pushes the Service Station out, turn the

Printer OFF.

TURN PRINTER POWER OFF.

CAUTION

WHENEVER POWERING DOWN UNIT, ALWAYS:

1. PRESS THE POWER BUTTON ON THE CONTROL PANEL.

2. WAIT FOR THE PRINTER TO STOP PROCESSING.

3. THEN PRESS THE MAIN POWER SWITCH ON THE REAR PANEL.