Product Manual

DO NOT DISCARD – GIVE TO USER
WARNING
www.astrotools.com
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
Model:
Product Type:
Before use, check the parts diagram and part number listing
on page 4 to make sure all parts are included. If any parts are
missing or damaged, please call your distributor.
This air operated paint shaker is designed to mix paint in
standard sealed paint cans and will accommodate pints, quarts
and gallons. Do not use this paint shaker outside of the designed
intent. Never modify this paint shaker for any other purpose or
use.
Before Use
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these instructions
in a safe accessible place.
INTENDED USE OF THE TOOL
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using this
product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
Always wear ANSI approved goggles when using this
product. (Users and Bystanders).
Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
Always select the correct accessories of the correct size
and design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
WARNING
4550A
AIR OPERATED PAINT SHAKER
AIR OPERATED PAINT SHAKER
MADE IN TAIWAN
Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year (except where noted on
our price schedule) from the date of 1st use. Astro reserves the right to determine
whether the product failed because of defective material, workmanship or other
causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The
distributor should direct the original user to return the product (with the exceptions
listed below) with the distributor’s name, address, adequate proof of date of
purchase or a copy of warranty card, and a short note explaining the problem.
Failures caused by accident, alteration, or misuse are not covered by this
warranty.
Astro Pneumatic Tool Co. or its authorized service representatives must perform
all warranty repairs. Any repair to the product by unauthorized service representa-
tives voids this warranty. The rights under this warranty are limited to the original
user and may not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so
the above limitations may not apply to you.
1 YEAR LIMITED WARRANTY
PRODUCT INFORMATION:
SPECIFICATIONS:
Capacity : 8.45 Pint (1.06 Gallon)
Air Consumption : 4 CFM
Air Inlet : 1/4" NPT
Speed : 1400 Cycles/Min.
Operating Pressure Ranges : 90 to 120 PSI at Inlet
Shaking Time : 1.5 Min.
Shaking Distance : 85~90mm
Page 1
• Now with larger 7.6" diameter clamps
• Clamps now fit larger paint cans
• Rubber coated clamps will accommodate Pints, Quarts
and Gallons
• Heavy duty construction
• Compact design
• Quieter and faster operation
• Includes oiler

Summary of content (4 pages)