User Manual

3025
2
• Normal use of this product is likely to expose
the user to dust and/or microscopic particles
containing chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm. Always wear appropriate
safety equipment and clothing when using this
product. Study, understand and follow all
instructions provided with this product.
• Always wear ANSI approved goggles when
using this product.
• Hand/Wrist/Arm injury may result from
repetitive work motion exposure to vibration.
Page 1
Cautions for Use
1.) This tool is intended for polishing and sanding with all types
of movement e.g. rotary, orbital and reciprocating,
using coated abrasive product and bonnets of
various soft materials and endless belts.
Any other use is forbidden.
2.)
Only use the polishing and sanding pads as recommended
by the pad manufacturer.
3.) It is forbidden to use the grinding wheels and
cut-off wheels on this tool.
4.)
Ensure the max. operating speed of the pad is higher
than the rated speed of the poser tool.
5.)
Centrally adhere sanding disc to support pad.
6.)
Always wear ANSI approved ear protection and
safety glasses when using this tool. Gloves and protective
clothing are recommended.
7.) Personal protection and dust collection devices shall
be chosen according to the material being worked upon.
Please consult provider of such devices.
8.) Release the start and stop device in case of failure
of energy supply.
9.) Only use the lubricant recommended by the manufacturer
6“ Finishing Palm Sander
6“ Finishing Palm Sander