User Manual

1
2
3
4A
4
5
6
7
8
10
9
11
12
13
14
15
18
16
17
25
30
24
23
22
21
20
28
23
27
26
19
29
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 4
Page 2
3055
372 Old US Highway 52 South
Mount Airy, NC 27030
3055
Page 1
3055
Important
When unpacking, check the parts diagram and part number
listing on pages 3-4 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
Product Information
• Blow molded case for easy storage and transport
• Kit Includes:
1 - 3" Mini Polisher - Direct Drive - 2,500rpm (#3043)
1 - 3" Sanding /Polishing Back-up Pad (#20302P)
1 - 3" Wool Buffing Pad (#20303)
1 - 3" Polishing Foam Pad - Yellow (#20306)
1 - 3" Polishing Foam Pad - White (#20306W)
SPECIFICATIONS:
Tool Weight: 1.45 lbs (0.66 kg)
Overal Length: 5-1/2 ins (140 mm)
Avg. Air Consumption: 5 (cfm) / 140 (l/min)
Recommended Air Pressure: 90 psi (6.3 bar))
Minimun Hose Size: 3/8" in. (10 mm)
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year from the date of 1st use.
Astro reserves the right to determine whether the product failed because of defective
material, workmanship or other causes and to charge back for missing parts. Astro
Pneumatic Tool Co., at its discretion, will repair products covered under this warranty
free of charge. The original user is to return the product (with the exceptions listed
below) with the distributor’s name, address, adequate proof of date of purchase or a
copy of warranty card, and a short note explaining the problem. Failures caused
by accident, alteration, or misuse are not covered by this warranty.
•If one part of this product fails, please do not return the entire product.
Astro will replace free of charge component parts of this product that fail
within 1 year of first use by the original user. Items included in this category
include but are not limited to kits, hand tool kits and any other product where
there are multiple items or components that make up the unit. Please contact
the phone number below in order to obtain the replacement components
covered under warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1 YEAR LIMITED WARRANTY
PLEASE CALL 1-800-221-9705
FOR REPAIR AND RETURN INSTRUCTIONS
3" AIR POLISHING KIT
3" AIR POLISHING KIT
3" AIR POLISHING KIT
3" AIR POLISHING KIT
FOR 3043 - 3" Mini Polisher
SUGGESTED AIR LINE CONNECTION
Product: 3055 Manual
Dimension: 8.5”x 11”/page
Date: 2007/01/04
Color:
Black
outside
inside
3043-01
3043-02
3043-03
3043-04
3043-04A
3043-05
3043-06
3043-07
3043-07P
3043-08
3043-09
3043-10
3043-11
3043-12
3043-13
3043-14
Lock Nut
Clamp Nut
Bearing Housing
Ball Bearing
Ball Bearing (Seal)
Washer
Spacer
Planet Carrier
Pin
Planet Gear
Internal Gear
Washer
Ball Bearing
Front End Plate
Rotor
Rotor Blade
1
1
1
2
1
1
1
1
3
3
1
1
1
1
1
4
1
2
3
4
4A
5
6
7
7P
8
9
10
11
12
13
14
Index
No.
3042-15
3042-16
3042-17
3042-18
3042-19
3042-20
3042-21
3042-22
3042-23
3042-24
3042-25
3042-26
3042-27
3043-28
3042-29
3042-30
Cylinder
Rear End Plate
Ball Bearing
Pin
Housing
Valve Stem
O-Ring
O-Ring
O-Ring
Valve Bushing
Trigger
Pin
Inlet Bushing
Wrench
Housing Sleeve
Spring
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Index
No.
Call 1.800.221.9705 for questions concerning performance of the product
or other inquiries.
Page 3
3055
372 Old US Highway 52 South
Mount Airy, NC 27030
3" AIR POLISHING KIT
3043
20302P
20303
20306
20306W
K-2077-1B
3" Mini Polisher - Direct Drive - 2,500rpm
3" Sanding/Polishing Back-up Pad
3" Wool Buffing Pad
3" Polishing Foam Pa - Yellow
3" Polishing Foam Pad - White
Blow Molded Case
1
1
1
1
1
1
1
2
3
4
5
6
Index
No.
5 2
4
3
1
6
FOR 3055 - 3" Air Polishing Kit