Manual

www.astrotools.com
Unpacking
When unpacking, check the parts diagram and part number listing
on page 2 to make sure all parts are included. If any parts are
missing or damage, please call your distributor.
•Astro Pneumatic Tool Co. warrants our products to the original user against
defective material or workmanship for a period of 1 year (except where noted on our
price schedule) from the date of 1st use. Astro reserves the right to determine
whether the product failed because of defective material, workmanship or other
causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its
discretion, will repair products covered under this warranty free of charge. The
distributor should direct the original user to return the product (with the exceptions
listed below) with the distributor’s name, address, adequate proof of date of
purchase or a copy of warranty card, and a short note explaining the problem.
Failures caused by accident, alteration, or misuse are not covered by this
warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose. Some states do
not allow the exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
1 YEAR LIMITED WARRANTY
Revised Date: 06/25/2007
4577
Mobile Masking Machine
Mobile Masking Machine
• Lightweight, easy to use and portable
• Dispenses rolls up to 18" in width
• Sharp, anodized blade for smooth cutting
• Unit can be used as a step stool
• Weight: 13lbs. (6kg)
Page 2
4577
Mobile Masking Machine
1. Using the provided bolts, nuts, and washer sets to
set up the frames (#4457-02) and the conncetion
bar (#4577-03).
2. Attach the paper roller assembly (#4577-04) to the
frames with bolts provided.
3. Attach the cutting blade (#4577-05) and the springs
to the frames with bolts, nuts, and washer sets
provided.
4. Attach the tape wheel assembly (#4577-06) to the
frames with bolts, nuts, and washer sets provided.
5. Attach #1 seat board on top of the frames with bolts
nuts, and washer sets provided.
Assembly Insructions:
PLEASE CALL 1-800-221-9705
FOR REPAIR AND RETURN INSTRUCTIONS
WARNING
Weight Capacity: 200 lbs. (100kg)
Do Not Exceed!
4577-01
4577-01A
4577-01B
4577-01C
4577-02
4577-03
4577-04
4577-04A
4577-04B
4577-04C
Seat Board
M6 x 40 Bolt
M6 Nut
6 x 12 Washer
Frame
Connection Bar
Paper Roller Assembly
Paper Roller Fixer
20 Washer
Spring
1
8
10
10
2
1
1
4
4
2
4577-04D
4577-04E
4577-04F
4577-05
4577-06
4577-06A
4577-06B
4577-06C
4577-06D
M10 x 40 Bolt
M10 Knob
Spring
Cutting Blade and Spring
Tape Wheel Assembly
M6 x 120 Bolt
Wing Nut
Tape Wheel Hub
06 x 17 Washer
1
1
2
1
2
2
4
2
4
1
2
4E
1A
1B
1B
1C
2
1A
1A
4D
1A
1A
1A
1C
1B
1C
1B
6D
1C
1C
1C
1B
1B
1B
6
6A
5
4F
3
4
4A
4A
4C
4B
4B
4B
6B
6C
6B
6B
6
6C
6D
6D
6A
6B
6D
1C
4C