Owner`s manual

NOTE: The LCD transmitter will also have the

zone 2 icon and the alarm icon indicating.

4. The in vehicle LED will illuminate continuously for the duration of shock adjustment

mode.

NOTE: When the shock sensor adjustment mode is

entered, all other timers and operations are bypassed

until shock sensor adjustment mode is exited.

ADJUSTING THE SHOCK SENSOR SETTING

NOTE: When adjusting the shock sensor,

ensure that the vehicle’s doors are closed.

1. Increase Sensitivity—Press and release the button to increase shock sensor sensitivity

by one step. The LCD transmitter beeps 2-times for each step increased in adjustment

(and/or 1 vibrate if programmed). When the shock sensor adjustment reaches

maximum sensitivity when the indicator bar is filled completely to the right

There are 21 levels of shock sensor adjustment, during sensor adjustment these levels

are displayed on the indicator bar as listed below.

NOTE: When the arm and disarm are programmed

to a single button, then the AUX button is used

to increase the sensitivity setting of the sensor.

Sensor

Adjustment

Level

Bar Number and

Indication

no bars displayed

bar 1 flashes

bar 1 solid

bar 1 solid, bar 2 flashes

bar 1-2 solid

bar 1-2 solid, bar 3 flashes

bar 1-3 solid

bar 1-3 solid, bar 4 flashes

bar 1-4 solid

bar 1-4 solid, bar 5 flashes

bar 1-5 solid

bar 1-5 solid, bar 6 flashes

bar 1-6 solid

bar 1-6 solid, bar 7 flashes

bar 1-7 solid

bar 1-7 solid, bar 8 flashes

bar 1-8 solid

bar 1-8 solid, bar 9 flashes

bar 1-9 solid

bar 1-9 solid, bar 10 flashes

bar 1-10 solid