Warranty

2
25th year. Consequently, at the end of the twenty-fifth
year from the “warranty start date”, the modules will still
produce a power output of at least 80.2% based on the
stated nominal output at STC.
For the above such loss in power measured by Astronergy
facility or the 3rd party testing institute recognized by
both sides, it is determined by Astronergy (at its sole
and absolute discretion) to be due to defects in material
or workmanship, is eligible for claim under this Limited
Warranty for Crystalline PV Modules. Astronergy will
remedy such loss in power by either providing additional
modules to the customer to make up for such loss in
power, or by repairing or replacing the defective modules
at the discretion of Astronergy.
The remedies set forth in this Clause 2 shall be the sole
and exclusive remedies provided under the “Limited Peak
Power Warranty – Limited Remedy”.
Caution: Any power measurement mentioned herein
shall be carried out in accordance with IEC 60904 and
subjected to - a power measurement uncertainty of ±3%.
3. Warranty Exclusions and Limitations
A. In any event, all warranty claims must be filed in
accordance with the instructions outlined in Clause 4 of
this Limited Warranty for Crystalline PV Modules, within
the applicable warranty period.
B. The Limited Warranty for Crystalline PV Modules does
not apply to any modules which have been subjected to:
• Misuse, abuse, neglect or accident;
• Alteration, disassemble, reinstallation, and/or improper
installation or application;
• Non-observance of Astronergy’s installation and
maintenance instructions;
• Repair or modifications by persons that have not been
previously authorized or approved by Astronergy;
• Failures caused by surrounding equipment of the
module;
• Use under unusual conditions or environments (such as
high temperature, high humidity and so on) that deviate
from the product specications and installation manual;
• Use for purposes unrelated to the generation of solar
power;
• Connection with any other manufacturer’s PV modules,
or Astronergy modules that are a different model or
have different power output specifications without
Astronergy’s approval in advance.
• Defects occurring during transportation or storage in
violation of usual transportation or storage rules or such
specified by Astronergy, after the modules have been
delivered to the customer;
• Naturally occurring scratches, stains, mechanical
wear, rust, degradation, discoloring, or other alteration
occurring after the shipment from Astronergy that have
no effect on the power generation performance or
mechanical strength of the module, but not limited to
the below visual alteration during the related warranty
period:
80.20%
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Linear Performance Warranty
Standard Performance Warranty
5.88%
more
100.00%
95.00%
90.00%
85.00%
80.00%
75.00%
97.00%