User's Manual
Table Of Contents
- 1 User Information
- 2 Important Safety Instructions
- 2.1 Safety and Precautions
- 2.2 Regulatory
- 2.2.1 USA – FCC Supplier Declaration of Conformity Product Identification and Responsible Party
- 2.2.1.1 Information to User
- 2.2.1.2 RF Exposure Statement
- 2.2.2 Canada – ISED Compliance Information
- 2.2.2.1 RF Exposure Statement
- 2.2.3 European Union (EU) Compliance Information
- 2.2.3.1 Radio Equipment Directive
- 2.2.3.2 RF Exposure Statement
- 2.2.3.3 WEEE
- 2.2.3.4 RoHS
- 2.2.3.5 REACH
- 2.3 Battery Safety
- 3 Introduction
- 4 Powering Up
- 5 Connecting to Sierra
- 6 Connecting using Aruba’s Web-based GUI
- 7 WLAN Setup
- 8 User Interface
- 9 Performance Data
- 10 Technical Data
- 11 Reliability and Maintainability
- 12 Support and Service
Page | 19 Revision Date April 30, 2020 || Document Number UM-E71-314 || Rev B
astronics.com
4 Powering Up
Two (2) high-density Lithium-ion (Li-ion) battery modules, RRC Power Solutions P/N RRC2054-2, are
required to power the Sierra. Alternatively, Sierra can be powered via the aircraft 28VDC power bus with
the appropriate STC. Refer to Figure 4-1.
Figure 4-1: Power Source
Once power is connected via batteries or external power source, turn the POWER switch to ‘ON’ position
as shown.
Figure 4-2: Power On/Off Switch and Power Indicator