User's Manual
Table Of Contents
- 1 User Information
- 2 Important Safety Instructions
- 2.1 Safety and Precautions
- 2.2 Regulatory
- 2.2.1 USA – FCC Supplier Declaration of Conformity Product Identification and Responsible Party
- 2.2.1.1 Information to User
- 2.2.1.2 RF Exposure Statement
- 2.2.2 Canada – ISED Compliance Information
- 2.2.2.1 RF Exposure Statement
- 2.2.3 European Union (EU) Compliance Information
- 2.2.3.1 Radio Equipment Directive
- 2.2.3.2 RF Exposure Statement
- 2.2.3.3 WEEE
- 2.2.3.4 RoHS
- 2.2.3.5 REACH
- 2.3 Battery Safety
- 3 Introduction
- 4 Powering Up
- 5 Connecting to Sierra
- 6 Connecting using Aruba’s Web-based GUI
- 7 WLAN Setup
- 8 User Interface
- 9 Performance Data
- 10 Technical Data
- 11 Reliability and Maintainability
- 12 Support and Service
Page | 21 Revision Date April 30, 2020 || Document Number UM-E71-314 || Rev B
astronics.com
5.2 SSH
The rear Ethernet port comes configured as a dhcp client to allow access to the system from your
development network. You can ssh into the unit using the Sierra username and password.
User: sierra
Password: sierra
Figure 5-2: Ethernet Port
5.3 SSID
Sierra comes configured with the following ATP SSIDs, where xxxxxx is replaced with the unit’s serial
number. The password for both is: 12345678
• xxxxxxw2p4ghz
• xxxxxxw5ghz