User's Manual
Table Of Contents
- 1 User Information
- 2 Important Safety Instructions
- 2.1 Safety and Precautions
- 2.2 Regulatory
- 2.2.1 USA – FCC Supplier Declaration of Conformity Product Identification and Responsible Party
- 2.2.1.1 Information to User
- 2.2.1.2 RF Exposure Statement
- 2.2.2 Canada – ISED Compliance Information
- 2.2.2.1 RF Exposure Statement
- 2.2.3 European Union (EU) Compliance Information
- 2.2.3.1 Radio Equipment Directive
- 2.2.3.2 RF Exposure Statement
- 2.2.3.3 WEEE
- 2.2.3.4 RoHS
- 2.2.3.5 REACH
- 2.3 Battery Safety
- 3 Introduction
- 4 Powering Up
- 5 Connecting to Sierra
- 6 Connecting using Aruba’s Web-based GUI
- 7 WLAN Setup
- 8 User Interface
- 9 Performance Data
- 10 Technical Data
- 11 Reliability and Maintainability
- 12 Support and Service
Page | 26 Revision Date April 30, 2020 || Document Number UM-E71-314 || Rev B
astronics.com
6.2 Network Selection
The Network section lists all the wireless networks (SSIDs) associated with the WAP, and displays the
number of clients currently connected to each SSID. Clicking on the “+” sign on the Network sections
title bar will display addition information about the wireless networks as show below in Figure 6-4.
Selecting one of the Blue SSID names will show additional details in the Information band.
The Info section on the left side displays the general settings for the selected network.
The RF Dashboard section displays a list of any clients experiencing signal or speed issues. Clicking
on the speed icon brings up a popup window with further details as shown in Figure 6-5.
Figure 6-4: Additional Network Information
Figure 6-5: Signal Speed Popup Window
The Usage Trends section provides both client, and throughput information for the selected wireless
network. in Figure 6-6, clicking on the throughput graph opens a popup window with a more detailed
graph.