User's Manual

52
2. Select the band for the wireless bridge.
3. In the AP Mode field, select any of these options:
• AP Only: Disables the WDS function.
• WDS Only: Enables the WDS feature but prevents other
wireless devices/stations from connecting to the router.
• HYBRID: Enables the Wireless Bridge feature and allows
other wireless devices/stations to connect to the router.
4. In the Connect to APs in list field, click Yes if you want to
connect to an Access Point listed in the Remote AP List.
5. On the Remote AP List, key in a MAC address and click the
Add button to enter the MAC address of other available
Access Points
6. Click Apply.
NOTES:
• InHybridmode,wirelessdevicesconnectedtotheASUSwireless
router only receives half the connection speed of the Access Point.
• AnyAccessPointaddedtothelistshouldbeonthesameControl
Channel and the same fixed Channel bandwidth as the local ASUS
wireless router. You can modify the Control Channel from Advanced
Settings > Wireless > General tab.