Quick Start Guide

6
English
NOTES:
• The Mobile Broadband LED lights up after you power on your
router with a Nano SIM card installed.
• Ensure that the Mobile Broadband LED lights up before setting
up your router via the QIS Wizard (Quick Internet Setup Wizard).
• You can use either Mobile Broadband or Ethernet WAN for
Internet access.
• The default username and password for Web GUI are admin
and admin.
• The auto-detection of your ISP connection type takes place
when you congure your Mobile Broadband router for the
rst time or when your Mobile Broadband router is reset to
its default settings. During the QIS process, you may need to
key in the PIN code of SIM card and APN (Internet Settings)
information that you obtained from your Internet Service
Provider (ISP).
Setting up your Mobile Broadband routerSetting up your Mobile Broadband router
1. Connect two 3G/4G antennas to
the left and right connectors, and
the WiFi antenna to the center
connector.
2. Insert a Nano SIM card into the
Nano SIM card slot.
3. Insert the AC adapter of your
router to the DCIN port and plug
it to a power outlet.
4. Press the power button to turn on
your Mobile Broadband router, and wait for a few minutes for
Internet connection.
5. You can set up your router via wired or wirelss connection.
• [Via Wired Connection]
Connect your computer to the router using a wired
Ethernet cable.
• [Via Wireless Connection]
Connect to the wireless network with SSID shown on the
product label on the back side of the router.
6. Set up your router via the QIS Wizard (Quick Internet Setup
Wizard) after the Mobile Broadband LED lights up.
a. Open a web browser and enter http://router.asus.com
to launch the web GUI. Follow onscreen instructions to
complete the setup.
b. You can also choose ASUS
Router app to set up your
router. Download ASUS
Router App to set up your
router via your mobile
devices.
ASUS Router
ASUS
Router
SIM Card Slot
Nano SIM
LAN
4
3
2
5
1
Wall Power Outlet
Power
Laptop
Laptop
Tablet
Smart phone