User's Manual

23
4.1.3 Wireless MAC Filter
Wireless MAC lter provides control over packets transmitted to
a specied MAC (Media Access Control) address on your wireless
network.
To set up the Wireless MAC lter:
1. From the navigation panel, go to Advanced Settings >
Wireless > Wireless MAC Filter tab.
2. In the Enable MAC Filter eld, select Ye s to enable Wireless
MAC lter.
3. In the MAC Filter Mode dropdown list, select either Accept or
Reject.
• SelectAccept to allow devices in the MAC lter list to access
the wireless network.
• SelectReject to prevent devices in the MAC lter list to
access the wireless network.
4. On the MAC lter list, click and key in the MAC address of
the wireless device.
5. Click Apply.