User's Manual

47
4.5 Administration
4.5.1 System
The System page allows you to congure your wireless router
settings.
To set up the System settings:
1. From the navigation panel, go to Advanced Settings >
Administration > System tab.
2. You can congure the following settings:
• Administrator Password: You can change the password and
login name for the wireless router by entering a new name
and password.
• LoginTimeout: Most Web administrators set this
property to 10 minutes. It should not be set higher than
20 minutes (except in special cases) because every open
session is holding onto memory.
• Time and Time Zone: Select the time and time zone for your
network.
• TimeZone:Adjusttimezoneaccordingtothelocation
of the router.
 • DaylightSavingTime(DST): If your region adopts
daylight saving time (DST), enable this option.
 • NTPServer: The wireless router can access a NTP
(Network time Protocol) server in order to synchronize
the time.
• WebAccessfromWAN:
  •  Enable Web Access from: Select Enable to allow
devices outside the network to access the wireless router
GUI settings. Select Disable to prevent access.
  •  Permitted IP Address:
   •  Any IP address can remotely manage the wireless
router.
   •  Only allow specic IP: Enter the WAN IP addresses
of networking devices allowed to access the wireless
router settings from WAN.