User guide
4-14 Chapter 4: Configuration
5. Setting up your wireless interface. To set up your wireless interface, follow the
same instructions from 3 to 5 as above Congurating Wireless Interface in
Access Point mode on page 26 and page27. You can change to AP or WDS
(Bridge), Station (Client), or URE (Repeater) accordingly. Click Save&Restart
to restart the wireless router and activate the new settings.
4.3.4 Wireless
Click an item on the menu to reveal a submenu. Follow the
instructions to set up the ASUS 802.11g AP. Tips are displayed
when you move your cursor over an item.
In ter fac e
SSID
The SSID is an identication string of up to 32 ASCII characters that differentiate
the ASUS 802.11g AP from other manufacturers. The SSID is also referred to as
the “ESSID” or “Extended Service Set ID.” You can use the default SSID and radio
channel unless more than one ASUS 802.11g AP is deployed in the same area.
In that case, you should use a different SSID and a radio channel for each ASUS
802.11g AP. All ASUS Wireless APs/Routers and ASUS 802.11g/802.11b WLAN
client adapters must have the same SSID to allow a wireless mobile client to roam.
By default, the SSID is set to “default”.