User Guide

2-24 Chapter 2: BIOS setup
2.4.5 Onboard Devices Conguration
HD Audio Controller [Enabled]
Onboard 1394 Controller [Enabled]
Onboard PCIE GbE LAN [Enabled]
LAN Option ROM [Disabled]
JMicron SATA/PATA Controller [Enabled]
JMicron Controller Mode [BASIC]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
HD Audio Controller [Enabled]
Allows you to enable or disable the High Denition Audio controller.
Conguration options: [Disabled] [Enabled]
Front Panel Support Type [HD Audio]
Allows you to set the Front Panel Support Type.
Conguration options: [AC97] [HD Audio]
Onboard 1394 Controller [Enabled]
Allows you to enable or disable the onboard 1394 controller.
Conguration options: [Disabled] [Enabled]
Onboard PCIE Gb LAN [Enabled]
Allows you to enable or disable the onboard PCIE Gigabit LAN controller.
Conguration options: [Disabled] [Enabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller.
This item appears only when the Onboard LAN item is set to Enabled.
Conguration options: [Disabled] [Enabled]
JMicron SATA/PATA Controller [Enabled]
Allows you to enable or disable the JMicron SATA/PATA controller.
Conguration options: [Disabled] [Enabled]
JMicron Controller Mode [BASIC]
Allows you to set the JMicron Controller Mode.
Conguration options: [RAID] [BASIC] [AHCI]
Must load the JMB363 driver when create RAID sets, even if all the drivers of
the RAID sets are used as data drivers.