User Guide

7-4
Adaptec 7800 Family Manager
Note:
Remember that SCO UnixWare commands are case
sensitive. Enter the commands exactly as shown.
Back Up the Computer
If you have not already done so, back up all important files on the
computer. See your SCO UnixWare documentation for proper SCO
UnixWare file system backup procedures.
1
Log in as root at the UnixWare # system prompt.
2
To back up the old SCO UnixWare kernel, type the following
and press Enter:
cp /stand/unix /stand/unix.work
3
To back up the old configuration file, type the following and
press Enter:
For SCO UnixWare 2.0x:
cp /etc/conf/sdevice.d/adsl20 /save/adsl20
or
cp /etc/conf/sdevice.d/adsb20 /save/adsb20
For SCO UnixWare 2.1:
cp /etc/conf/sdevice.d/adsl /save/adsl
or
cp /etc/conf/sdevice.d/adsb /save/adsb
Load the Package
To load the driver, follow these steps:
1
At the system prompt, type the following and press Enter:
pkgadd -d diskette1
Follow the instructions onscreen to insert the IHV HBA
diskette (or 7800 Family Manager Set diskette for UnixWare
2.x) into the floppy boot drive.
2
Select the adsl20 / adsl or adsb20 / adsb package from the
onscreen menu and press Enter. The package is loaded into
your SCO UnixWare operating system.