User Guide

7-12
Adaptec 7800 Family Manager
[xxxxx003] Command completed with error
[xxxxx004] Command completed with error
[xxxxx005] Command completed with error
[xxxxx006] Command completed with error
[xxxxx007] Command completed with error
[xxxxx008] Command completed with error
[xxxxx009] Command completed with error
A request issued to a target device completed with an indication that
there is an error. In most cases, the error is recovered and normal
operation continues.
[xxxxx010] Error issuing command
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site or BBS.
[xxxxx011] Error issuing command
The requested command is not supported by this driver.
[xxxxx012] Error issuing command
The driver does not recognize the target device.
[xxxxx013] Error issuing command
[xxxxx014] Error issuing command
An error has occurred while the driver was setting up its internal
data structures. Try installing the most up-to-date version of the
driver available from the Adaptec Web site or BBS.
[xxxxx015] Error issuing command
An error has occurred with the driver. Try installing the most up-to-
date version of the driver available from the Adaptec Web site or
BBS.
[xxxxx020] Adapter or target device not responding or not connected
The target device did not respond to the adapter. If the device is
present, refer to your host adapter’s user’s guide for
troubleshooting information. If the device is no longer connected to
the system, ignore this error.