User Guide

2-10

Adaptec 7800 Family Manager

Note:

Changes made with the Registry Editor do not take

effect until you shut down and then restart your system.

Using Driver-specific Parameters

To use the Registry Editor to enter

aic78xx.sys

aic78u2.sys

driver-specific parameters that affect the configuration information

for Adaptec SCSI PCI device drivers, follow the instructions below.

A list of valid parameters follows.

Note:

The following parameters are case-sensitive and must

be entered exactly as shown. When entering multiple

parameters, each parameter must be separated by a space.

■

/INSTRUMENTATION—enables recording of I/O statistics

and errors. If this option is not specified, instrumentation

defaults to disabled. The data type for this value is REG_SZ.

■

/INSTR_ERRLOG_Z=nnn—sets the maximum number of

error log entries, if /INSTRUMENTATION is enabled. If a

number is not specified, the maximum number or error log

entries defaults to 32. Valid values are 0-128. The data type for

this value is REG_SZ.

■

/MAXTAGS=nnn—specifies the tagged command queue

depth. If a number is not specified, the tagged queue depth

defaults to 128. Valid values are 1-255. The data type for this

value is REG_SZ.