User Guide

2-13
Microsoft Windows NT Installation
4
If you are sure you are removing the correct host adapter type,
click OK.
5
Return to Step 3 to remove driver support for other types of
host adapters, or click Close to exit the SCSI adapters portion
of Windows NT Setup.
6
Close the Windows NT Setup program. When the following
message appears, click OK to exit:
The changes you have made will not take effect until the
computer is restarted.
If this message does not appear, no changes have been made to
the Windows NT system configuration.
7
Restart the computer.
Note:
Windows NT Setup does not delete the device driver
from your system disk; it only updates Windows NT
software configuration information so that the device driver
is no longer loaded during system bootup.