User Guide

4-10
Adaptec 7800 Family Manager
Table of aic78u2.dsk Command Line Options
slot= 0-xxxx
2
0 Defines a physical slot
number for the host
adapter. If 0 is specified, or
if this option is not
specified, then the driver
loads for all 7800 Family
host adapters.
verbose= yes, no no Displays host adapter
configuration information
at load time.
1
Many multiple-lun and removable media devices are changers or magazines. Some
of these are only supported by the driver through an ASPI driver provided by the
hardware vendor.
2
The values can vary and are dependent on the system configuration.
Option Values Default Description
auto_bus_fairness= on, off on Enables/disables auto
SCSI bus fairness
algorithm.
auto_disable_tagq= on, off on Enables/disables auto
disable tag queuing
algorithm.
auto_flush_diskreq= on, off on Enables/disables auto
disk flush algorithm.
dev_enable= 0-FFFF FFFF Allows you to enable the
driver's registration of
SCSI devices on a per
target basis. By default, all
targets are scanned. A bit
value of 0 causes the
target not to register
under the operating
system. These devices are
still accessible via ASPI.
This enable bit mask is
entered in hex (see Bit
Mask Options on
page 4-12).
Option Values Default Description