User Guide

5-5
IBM OS/2 Installation
4
For each driver removed from the OS/2 diskette #1, remove its
corresponding line in the
config.sys file (also on OS/2 diskette
#1).
For example, if you deleted all Adaptec drivers, as explained in
Step 2a, above, remove the following lines from the
config.sys
file:
basedev=aha152x.add
basedev=aha154x.add
basedev=aha164x.add
basedev=aha174x.add
basedev=aic7770.add
basedev=fd16_700.add
5
In the config.sys file on OS/2 diskette #1, add the following
line:
set copyfromfloppy=1
This line must be added so that the install process copies the
aic7870.add or aic78u2.add driver from the OS/2 diskette #1,
instead of the
aic7870.add driver included on your OS/2 CD-
ROM.
Note:
For OS/2 Warp 4.0 or 4.0 SMP users only, add
the basedev=aic7870.add or basedev=aic78u2.add
line to the top line of the
config.sys file on OS/2
diskette #1. This will result in two
basedev=aic7870.add or basedev=aic78u2.add
statements existing in the config.sys file.
6
Run the OS/2 installation program; follow the instructions in
your OS/2 documentation until you reach the System
Configuration window.
7
In the System Configuration windows, click the SCSI Adapter
Support icon.
8
Deselect any highlighted adapters (including the Adaptec
294x, 394x, AIC7870 PCI SCSI), and click OK. The text box for
SCSI Adapter Support should say None.