User manual

9
What you need
To set up your network, you need one or two computers that meet
the following system requirements:
 • EthernetRJ-45(LAN)port(10Base-T/100Base-TX/
1000BaseTX)
 • IEEE802.11a/b/g/nwirelesscapability
 • AninstalledTCP/IPservice
 • WebbrowsersuchasInternetExplorer,Firefox,Safari,or
Google Chrome
NOTES:
• Ifyourcomputerdoesnothavebuilt-inwirelesscapabilities,
you may install an IEEE 802.11a/b/g/n WLAN adapter to your
computer to connect to the network.
• Withitsdualbandtechnology,yourwirelessroutersupports
2.4GHz and 5GHz wireless signals simultaneously. This allows
you to do Internet-related activities such as Internet surng or
reading/writing e-mail messages using the 2.4GHz band while
simultaneously streaming high-denition audio/video les
such as movies or music using the 5GHz band.
• Ifyouareusingonlyonecomputerwithsingleband
IEEE 802.11b/g/n WLAN adapter, you will only be able to use
the 2.4GHz band.
• Ifyouareusingonlyonecomputerwithdualband
IEEE 802.11a/b/g/n WLAN adapter, you will be able to use the
2.4GHz or 5GHz band.
• Ifyouareusingtwocomputerswithboth
IEEE 802.11a/b/g/n WLAN adapters, you will be able to use
both 2.4GHz and 5GHz bands simultaneously.
• TheEthernetRJ-45cablesthatwillbeusedtoconnectthe
network devices should not exceed 100 meters.