User manual

English
LEDs and buttons
LED STATUS DESCRIPTION
2.4G /5G
Wi-Fi
Blinking
rapidly
Your PL-AC56 is cloning the parent
AP’s SSID and password.
Blinking every
second
Your PL-AC56 is resetting to the
factory default settings.
Powerline On The device is connected to one or
more powerline devices.
O The device is not connected to any
powerline devices.
Blinking In Power-Saving mode, the power-
line LED blinks every 15 seconds.
Ethernet On/O A device is connected or not con-
nected to the Ethernet port.
Blinking The powerline adapter is transfer-
ring data via the Ethernet port.
Power On/O Your device is on/o.
When switched on, the power LED
turns from red to green in about
one minute, indicating that it is
ready to use.
Blinking Blinking every second: Pairing is in
progress.
BUTTON DESCRIPTION
Clone Press and hold the button for about one second to start
cloning the parent AP’s SSID and password.
Pair Press and hold the button for about one second to start
the pairing process.
Reset Press and hold the button for about ve seconds to restore
your device to the factory default settings.
U11264_PL-AC56_Kit_QSG_Booklet_105x170mm.indb 4 2016-02-04 10:04:49