User manual

ManualsBrandsASUS ManualsMonitorsROG Swift PG278QR LED 68.6 cm (27 ") EEC C 2560 x 1440 pix WQHD 1 ms HDMI™, DisplayPort, Audio stereo (3.5 mm jack

3-1ASUS PG278QR Series LCD Monitor

3.1 OSD (On-Screen Display) menu

 

MOVE/ENTER

BACK

EXIT

Max Refresh Rate 165HzOver Clocking

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode HDMI 2560 x 1440@ 60Hz

Racing Mode

ASUS ROG PG278QR

1. Press the ( ) button to activate the OSD menu.

2. Move the

( ) button up/down to navigate through the functions.

Highlight the desired function and press the

( ) button to activate it. If

the function selected has a sub-menu, move the

( ) button up/down

again to navigate through the sub-menu functions. Highlight the desired sub-

menu function and press the

( ) button or move the ( ) button

right to activate it.

3. Move the

( ) button up/down to change the settings of the selected

function.

4. To exit and save the OSD menu, press the

button or move the

(

) left repeatedly until the OSD menu disappears. To adjust other

functions, repeat steps 1-3.

 

 

This function allows you to adjust the refresh rate.