Motherboard ROG MAXIMUS XII EXTREME
G16774 Überarbeitete Ausgabe V3 Mai 2020 Copyright © 2020 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieses Handbuchs, einschließlich der darin beschriebenen Produkte und Software, darf ohne ausdrückliche schriftliche Genehmigung von ASUSTeK COMPUTER INC. (“ASUS”) mit jeglichen Mitteln in jeglicher Form reproduziert, übertragen, transkribiert, in Wiederaufrufsystemen gespeichert oder in jegliche Sprache übersetzt werden, abgesehen von vom Käufer als Sicherungskopie angelegter Dokumentation.
Inhaltsverzeichnis Sicherheitsinformationen..........................................................................................................v Über dieses Handbuch...............................................................................................................vi ROG MAXIMUS XII EXTREME Spezifikationsübersicht..........................................................vii Anschlüsse mit gemeinsam genutzter Bandbreite...............................................................
Anhang Q-Code-Tabelle........................................................................................................................A-1 Hinweise...................................................................................................................................A-5 ASUS Kontaktinformation....................................................................................................
Sicherheitsinformationen Elektrische Sicherheit • Um die Gefahr eines Stromschlags zu verhindern, ziehen Sie das Netzkabel aus der Steckdose, bevor Sie das System an einem anderen Ort aufstellen. • Beim Anschließen oder Trennen von Geräten an das oder vom System müssen die Netzleitungen der Geräte ausgesteckt sein, bevor die Signalkabel angeschlossen werden. Wenn möglich, entfernen Sie alle Stromkabel vom bestehenden System, bevor Sie ein Gerät hinzufügen.
Über dieses Handbuch Dieses Benutzerhandbuch enthält Informationen, die Sie bei der Installation und Konfiguration des Motherboards brauchen. Wie dieses Handbuch aufgebaut ist Dieses Handbuch enthält die folgenden Abschnitte: • Kapitel 1: Produkteinführung Dieses Kapitel beschreibt die Leistungsmerkmale des Motherboards und die neuen Technologien, die es unterstützt. Es beschreibt Schalter, Brücken und Konnektoren auf dem Motherboard.
ROG MAXIMUS XII EXTREME Spezifikationsübersicht CPU Intel Sockel LGA1200 für 10. Generation Intel Core™, Pentium Gold und Celeron Prozessoren* Unterstützt Intel 14 nm CPU Unterstützt Intel Turbo Boost Technologie 2.0 und Intel Turbo Boost Max Technologie 3.0** * Siehe www.asus.com für die CPU Support-Liste. ** Die Unterstützung der Intel Turbo Boost Max Technologie 3.0 ist abhängig vom CPUTyp. Chipsatz Speicher Intel Z490 Chipsatz 4 x DIMM, Max.
ROG MAXIMUS XII EXTREME Spezifikationsübersicht WLAN & Bluetooth Intel Wi-Fi 6 AX201 2x2 Wi-Fi 6 (802.11 a/b/g/n/ac/ax) unterstützt 1024QAM/OFDMA/MU-MIMO Unterstützt eine maximale Datenübertragungsrate von bis zu 2,4 Gb/s Unterstützt 2,4/5 GHz Dualband Unterstützt die Kanalbandbreite: HT20/HT40/HT80/HT160 Unterstützt die CNVi-Schnittstelle Bluetooth v5.1* * Die BT 5.1-Funktion ist in Windows 10 Build 19041 oder höher verfügbar. USB Audio USB hinten (insgesamt 12 Anschlüsse) 1 x USB 3.
ROG MAXIMUS XII EXTREME Spezifikationsübersicht Interne E/A-Anschlüsse Lüfter- und Kühler-bezogen 1 x CPU-Lüfter-Header (4-polig) 1 x CPU OPT-Lüfter-Header (4-polig) 2 x Gehäuselüfter-Header (4-polig) 8 x Kühlerlüfter-Header (4-polig) 2 x W_PUMP+ Header 1 x WB_SENSOR Header 1 x Wassereingangs-Header (2-polig) 1 x Wasserausgangs-Header (2-polig) 1 x Wasserfluss-Header (3-polig) 1 x NODE-Header Strombezogen 1 x 24-poliger Hauptstromanschluss 2 x 8-polige +12V Stromanschlüsse 1 x 4-poliger EZ_PLUG Anschluss
ROG MAXIMUS XII EXTREME Spezifikationsübersicht Sonderfunktionen ROG Extreme OC Kit - EZ PLUG - FlexKey-Taste - LN2-Modus - Probelt - Retry-Taste - Sicherer-Start-Taste - Starttaste - Langsam-Modus Extreme Engine Digi+ - 10K Schwarz-Metallic Kondensatoren - Infineon TDA21490 Power Stage - MicroFine Legierungsdrossel ASUS Q-Design - ASUS Q-Code - ASUS Q-Connector - ASUS Q-DIMM - ASUS Q-LED (CPU [rot], DRAM [gelb], VGA [weiß], Boot-Gerät [gelb grün]) - ASUS Q-Slot ASUS Thermal Solution - M.
ROG MAXIMUS XII EXTREME Spezifikationsübersicht Softwarefunktionen Exklusive ROG-Software - Mem Tweakit - RAMCache III - ROG CPU-Z - GameFirst VI - Sonic Studio III + Sonic Studio Virtual Mixer - Sonic Radar III - DTS Sound Unbound - Overwolf - BullGuard Internet Security (1 Jahr Vollversion) Exklusive ASUS-Software Armoury Crate - Aura Creator - Aura Sync - OLED-Display AI Suite 3 - 5-Wege-Optimierung mit AI-Übertaktung TPU EPU Wenn dies geschieht, kehren Sie zu Standardeinstellungen zurück Fan Xpert 4 T
Anschlüsse mit gemeinsam genutzter Bandbreite A B A C C B A Konfiguration A 2 3 4 x16 x8 x8 x8 PCIEX16_2 DIMM.2_1 DIMM.2_2 - x8 - x4 x4 x4 x4 - Konfiguration 1 2 PCIEX4 x2 x4 B SATA56 V - Konfiguration 1 2 x4 - V C xii 1 PCIEX16_1 M.
• Die DIMM.2 Steckplätze sind standardmäßig deaktiviert. Bitte ändern Sie die BIOSEinstellungen, um die DIMM.2 Steckplätze zu aktivieren. • Der PCIEx4 Steckplatz teilt die Bandbreite mit dem SATA6G_56, und der PCIEx4 Steckplatz ist standardmäßig auf den x2 Modus eingestellt. • Wenn der M.2_1 im SATA-Modus arbeitet, dann wird der SATA6G_2 deaktiviert.
Verpackungsinhalt Stellen Sie sicher, dass Ihr Motherboard-Paket die folgenden Artikel enthält.
Installationswerkzeuge und Komponenten Philips (Kreuz)-Schraubenzieher PC Gehäuse Netzteil Intel LGA 1200 CPU CPU-Lüfter, kompatibel mit Intel LGA 1200 DDR4 DIMM SATA Festplattenlaufwerk SATA optisches Laufwerk (optional) Grafikkarte (optional) M.2 SSD Modul (optional) 1 Tüte mit Schrauben Das Werkzeug und die Komponenten, die in der Tabelle aufgelistet sind, sind nicht im Motherboard-Paket enthalten.
xvi
Produkteinführung 1.1 Bevor Sie beginnen 1 Kapitel 1 Kapitel 1: Produkteinführung Beachten Sie bitte vor dem Installieren der Motherboard-Komponenten oder dem Ändern von Motherboard-Einstellungen folgende Vorsichtsmaßnahmen. • Ziehen Sie das Netzkabel aus der Steckdose heraus, bevor Sie eine Komponente anfassen. • Tragen Sie vor dem Anfassen von Komponenten eine geerdete Manschette, oder berühren Sie einen geerdeten Gegenstand bzw. einen Metallgegenstand wie z.B.
1.
ROG MAXIMUS XII EXTREME Seite 1-4 1-5 1-7 1-9 1-10 1-10 1-11 1-12 1-13 1-14 1-15 1-15 1-16 1-17 1-18 1-19 1-19 1-20 1-20 1-21 1-22 1-23 1-23 1-24 1-24 1-25 1-26 1-27 1-28 1-29 1-30 1-30 1-31 1-31 Kapitel 1 Ausstattungsinhalt 1. CPU-Sockel 2. DIMM-Steckplätze 3. Erweiterungssteckplätze 4. Lüfter- und Pumpen-Header 5. Header für die Wasserkühlung 6. Flüssigkeitskühlungssystem-Header 7. Stromanschlüsse 8. M.2 Steckplatz (Key M) 9. DIMM.2-Steckplatz 10. SATA 6GB/s Anschluss 11. USB 3.
1. CPU-Sockel Dieses Motherboard ist mit einem LGA1200 Sockel für die 10. Generation Intel Core™, Pentium Gold und Celeron Prozessoren ausgestattet. Kapitel 1 1-4 • Stellen Sie sicher, dass Sie nur die richtige CPU für LGA1200 Sockel installieren. Installieren Sie KEINESFALLS eine für andere Sockel entworfene CPU auf dem LGA1200 Sockel. • Die CPU passt nur in einer Richtung hinein.
2. DIMM-Steckplätze Das Motherboard ist mit Dual Inline Memory Module (DIMM)-Steckplätzen für DDR4 (Double Data Rate 4)-Speichermodule ausgestattet. Kapitel 1 Ein DDR4-Speichermodul ist anders gekerbt als DDR-, DDR2- oder DDR3-Module. Installieren Sie KEIN DDR-, DDR2- oder DDR3-Speichermodul auf einen DDR4-Steckplatz.
Speicherkonfigurationen Sie können 4 GB, 8 GB, 16 GB und 32 GB ungepufferte und nicht-ECC DDR4 DIMMs in den DIMMSockeln installieren. Kapitel 1 Sie können verschiedene Speichergrößen in Kanal A und B installieren. Das System plant die Gesamtgröße des kleineren Kanals für die Dual-Channel-Konfiguration. Der überschüssige Speicher des größeren Kanals wird dann für den Single-Channel-Betrieb eingeplant.
3. Erweiterungssteckplätze Kapitel 1 Trennen Sie das Stromkabel, bevor Sie Erweiterungskarten hinzufügen oder entfernen . Andernfalls können Sie sich verletzen und die Motherboard-Komponenten beschädigen. In der folgenden Tabelle finden Sie die empfohlene VGA-Konfiguration.
Empfohlene VGA-Konfiguration Steckplatzbeschreibung 2. PCIe 3.0 x16_1 3. PCIe 3.0 x16_2 Einzel VGA x16 - Dual VGA x8 x8 Kapitel 1 • Wir empfehlen, dass Sie eine ausreichende Stromversorgung zur Verfügung stellen, wenn Sie den CrossFireX™- oder SLI-Modus verwenden. • Wenn Sie mehrere Grafikkarten benutzen, verbinden Sie für eine bessere Umgebungstemperatur die Gehäuselüfter mit den Gehäuselüfteranschlüssen auf dem Motherboard.
Lüfter- und Pumpen-Header Die Lüfter- und Pumpen-Header ermöglichen Ihnen, Lüfter oder Pumpen zur Kühlung des Systems zu verbinden. Kapitel 1 4. • Vergessen Sie NICHT, die Lüfterkabel mit den Lüfter-Headern zu verbinden. Eine unzureichende Belüftung innerhalb des Systems kann die Motherboard-Komponenten beschädigen. Dies sind keine Jumper! Stecken Sie keine Jumper-Kappen auf die LüfterHeader! • Stellen Sie sicher, dass das Kabel vollständig in den Header eingesteckt ist.
Header für die Wasserkühlung Der Header für die Wasserkühlung ermöglicht es Ihnen, Sensoren zu verbinden, um die Temperatur, die Durchflussleistung und Signale für Wasserundichtigkeit von den Drittanbieter-Monoblöcken zu überwachen. Sie können die Lüfter und die Wasserpumpe manuell anpassen, um den Wärmehaushalt Ihrer Drittanbieter-Monoblöcke zu optimieren. 6.
Stromanschlüsse Diese Stromanschlüsse ermöglichen Ihnen, Ihr Motherboard mit einem Netzteil zu verbinden. Die Stromversorgungsstecker passen nur in einer Richtung. Finden Sie die richtige Ausrichtung und drücken Sie die Stromversorgungsstecker fest nach unten, bis sie vollständig eingesteckt sind. Kapitel 1 7. Stellen Sie sicher, dass Sie den 8-poligen Stromstecker anschließen.
8. M.2-Steckplatz Der M.2-Steckplatz ermöglicht Ihnen, M.2 SSD-Module zu installieren. Kapitel 1 • Der M.2_1 Steckplatz unterstützt das PCIe 3.0 x4 und SATA Modus Key M Design sowie Speichergeräte des Typs 2242 / 2260 / 2280. • Der M.2_2 Steckplatz unterstützt das PCIe 3.0 x4 Modus Key M Design sowie PCIeSpeichergeräte des Typs 2242 / 2260 / 2280. • Wenn der M.2_1 im SATA-Modus arbeitet, dann wird der SATA6G_2 deaktiviert. • Die M.2 Steckplätze unterstützen IRST (Intel Rapid Storage Technologie).
DIMM.2-Steckplatz Der DIMM.2-Steckplatz ermöglicht Ihnen, eine DIMM.2-Karte zu installieren, um zusätzliche M.2 SSD-Module zu unterstützen. Kapitel 1 9. • Vor dem Installieren oder Ausbau der DIMM.2-Karte muss die Stromversorgung ausgeschaltet oder das Netzkabel aus der Steckdose gezogen sein. Nichtbeachtung kann zu schweren Schäden am Motherboard und der DIMM.2-Karte führen. • Die DIMM.2-Karte ist eingekerbt und passt nur in einer Richtung hinein.
10. SATA 6 Gb/s Anschlüsse Die SATA 6 Gb/s Anschlüsse ermöglichen Ihnen, SATA-Geräte, wie optische Laufwerke und Festplatten über ein SATA-Kabel anzuschließen. Kapitel 1 Falls Sie SATA-Speichergeräte installiert haben, können Sie eine RAID 0-, 1-, 5- und 10-Konfiguration mit der Intel Rapid Storage Technologie über den integrierten Intel Z490-Chipsatz erstellen. 1-14 • Die Steckplätze sind standardmäßig auf [AHCI] eingestellt.
USB 3.2 (Gen2) Frontblendenanschluss Der USB 3.2 (Gen2)-Anschluss ermöglicht es Ihnen, ein USB 3.2 (Gen2)-Modul für zusätzliche USB 3.2 (Gen2)-Anschlüsse zu verbinden. Der USB 3.2 (Gen2)-Anschluss bietet Datenübertragungsgeschwindigkeiten bis zu 10 Gb/s. Kapitel 1 11. Das USB 3.2 (Gen2)-Modul muss separat erworben werden. 12. USB 3.2 (Gen1)-Header Der USB 3.2 (Gen1)-Header ermöglicht es Ihnen, ein USB 3.2 (Gen1)-Modul für zusätzliche USB 3.2 (Gen1)-Anschlüsse zu verbinden. Der USB 3.
13. USB 2.0-Header Der USB 2.0-Header ermöglicht es Ihnen, ein USB-Modul für zusätzliche USB 2.0-Anschlüsse zu verbinden. Der USB 2.0-Header bietet Datenübertragungsgeschwindigkeiten bis zu 480 Mb/s. Kapitel 1 Verbinden Sie niemals ein 1394-Kabel mit den USB-Anschlüssen. Sonst wird das Motherboard beschädigt! Das USB 2.0 Modul muss separat erworben werden.
Ansteuerbarer AURA (Gen2)-Header Der ansteuerbare (Gen2) Header ermöglicht Ihnen, einzeln ansteuerbare RGB WS2812B LEDLeisten oder WS2812B-basierte LED-Leisten zu verbinden. Kapitel 1 14. Der ansteuerbare (Gen2) Header unterstützt ansteuerbare RGB WS2812B LED-Leisten (5V/Data/ Ground) mit einer maximalen Leistung von 3 A (5 V). Die ansteuerbaren Header auf diesem Board können zusammen maximal 500 LEDs bedienen.
15. AURA RGB-Header Der AURA RGB-Header ermöglicht Ihnen, RGB LED-Leisten zu verbinden. Kapitel 1 Der AURA RGB-Header unterstützt mehrfarbige 5050 RGB LED-Leisten (12 V/G/R/B) mit einer maximalen Leistung von 3 A (12 V). Vor dem Installieren oder Ausbau einer Komponente muss die Stromversorgung ausgeschaltet oder das Netzkabel aus der Steckdose gezogen sein. Nichtbeachtung kann zu schweren Schäden am Motherboard, Peripheriegeräten oder Komponenten führen.
BIOS-Umschalttaste Dieses Motherboard ist mit zwei BIOS-Chips ausgestattet. Drücken Sie die BIOS-Umschalttaste zum Wechseln der BIOS-Varianten und laden Sie verschiedene BIOS-Einstellungen. Kapitel 1 16. Die BIOS_LEDs in der Nähe zeigen das aktuell ausgewählte BIOS an. 16. FlexKey-Taste (Reset) Drücken Sie die FlexKey-Taste, um das System neu zu starten. Sie können die Taste auch konfigurieren und ihr eine Schnellzugriffsfunktion zuweisen, z. B.
17. Frontblenden-Audio-Header Der Fronttafel-Audio-Header ist für ein am Gehäuse befestigtes Frontblenden-Audio-E/AModul, das HD Audiostandard unterstützt. Verbinden Sie das eine Ende des FrontblendenAudio-E/A-Modul-Kabels mit diesem Header. Kapitel 1 Wir empfehlen Ihnen, ein High-Definition Frontblenden-Audiomodul mit diesem Anschluss zu verbinden, um die High-Definition Audio-Funktionen dieses Motherboards zu nutzen. 18.
Node-Header Über den Node-Header können Sie eine kompatible Lüftererweiterungskarte steuern. Kapitel 1 20.
21. ProbeIt-Messpunkte Mit ROG ProbeIt können Sie die Stromspannung und Übertaktungseinstellungen Ihres Systems mittels eines Multimeters erfassen. Sie können die ProbeIt-Punkte auch während der Übertaktung messen. Kapitel 1 ProbeIt verwenden Verbinden Sie einen Tastkopf mit dem GND ProbeIt-Punkt, verbinden Sie dann den anderen Tastkopf mit einem anderen ProbeIt-Punkt, um die entsprechenden Spannungen zu messen.
Retry-Taste Die ReTry-Taste ist speziell für Übertakter vorgesehen und während des Startvorgangs, bei dem die Reset-Taste unbrauchbar ist, besonders praktisch. Drücken Sie diese Taste, um einen Systemneustart zu erzwingen, während die Einstellungen für wiederholte Versuche in schneller Folge zur Erzielung eines erfolgreichen POST beibehalten werden. 23. RSVD-Schalter Der RSVD-Schalter ist nur für von ASUS autorisierte Techniker vorbehalten. Kapitel 1 22.
Sicherer-Start-Taste Die Sicherer-Start-Taste wendet vorübergehend sichere Einstellungen auf das BIOS an, während jegliche übertakteten Einstellungen beibehalten werden, sodass Sie die Einstellungen ändern können, die den Startfehler verursachen. Drücken Sie diese Taste jederzeit, wenn ein Systemneustart im abgesicherten BIOS-Modus erzwungen werden soll. 25. Langsam-Modus-Schalter Das System kann abstürzen, wenn extreme Übertaktungseinstellungen verwendet werden, da die CPU dadurch instabil wird.
Starttaste Drücken Sie die Starttaste, um das System einzuschalten oder in den Ruhezustand oder SoftOff-Modus zu versetzen (je nach den Einstellungen des Betriebssystems). Kapitel 1 26. Die Taste leuchtet auch auf, wenn das System an eine Stromquelle angeschlossen ist und weist Sie darauf hin, dass Sie das System herunterfahren und das Stromkabel ziehen sollten, bevor Sie die Motherboardkomponenten entfernen oder installieren.
System-Panel-Header Der System-Panel-Header unterstützt mehrere Funktionen für am Gehäuse befestigte Geräte. • Systembetriebs-LED-Header (PLED) Der 2-polige Header ermöglicht Ihnen, die Systembetriebs-LED zu verbinden. Die Systembetriebs-LED leuchtet, wenn das System an eine Stromquelle angeschlossen ist oder wenn Sie das System einschalten. Sie blinkt, wenn sich das System im Ruhezustand befindet.
Thermischer Sensor-Header Der Header für thermische Sensoren ermöglicht Ihnen, einen Sensor zur Überwachung der Temperatur der Geräte und der kritischen Komponenten im Inneren des Motherboards zu verbinden. Schließen Sie den thermischen Sensor an und platzieren Sie ihn am Gerät oder an der Komponente des Motherboards, um die Temperatur zu messen. Kapitel 1 28. Der thermische Sensor ist separat erhältlich.
29. Thunderbolt Header Der Thunderbolt-Header ermöglicht Ihnen, eine Thunderbolt-E/A-Zusatzkarte zu verbinden, die von der Intel Thunderbolt Technologie unterstützt wird, sodass Sie bis zu sechs Thunderbolt-fähige Geräte und einen DisplayPort-fähigen Bildschirm in einer Reihenschaltungskonfiguration anschließen können.
Q-Code LED Der Q-Code-LED bietet Ihnen einen 2-stelligen Fehlercode, der den Systemstatus anzeigt. Kapitel 1 30. • Die Q-Code LEDs zeigen die wahrscheinlichste Ursache des Fehlers und somit den Ausgangspunkt für die Problembehandlung an. Die tatsächliche Ursache kann sich jedoch von Fall zu Fall unterscheiden. • Entnehmen Sie bitte der Q-Code-Tabelle im Anhang weitere Einzelheiten.
31. Q-LEDs Die Q-LEDs prüfen Schlüsselkomponenten (CPU, DRAM, VGA und Systemstartgeräte) während des Motherboard-Startvorgangs. Wenn ein Fehler gefunden wird, leuchtet die LED der kritischen Komponente, bis das Problem gelöst ist. Kapitel 1 Die Q-LEDs zeigen die wahrscheinlichste Ursache des Fehlers und somit den Ausgangspunkt für die Problembehandlung an. Die tatsächliche Ursache kann sich jedoch von Fall zu Fall unterscheiden. 32.
Speichergeräteaktivitäts-LED Die Speichergeräteaktivitäts-LED leuchtet oder blinkt, wenn vom Speichergerät oder von der Speichergerätezusatzkarte Daten gelesen oder darauf geschrieben werden. 34. LED für 8-poligen Stromstecker Die LED für den 8-poligen Stromstecker leuchtet, um anzuzeigen, dass der 8-polige Stromstecker nicht angeschlossen ist. Kapitel 1 33.
Kapitel 1 1-32 Kapitel 1: Produkteinführung
Kapitel 2: Grundinstallation Basisinstallation 2.1 Ihr Computersystem aufbauen 2 Die Abbildungen in diesem Abschnitt sind nur als Referenz gedacht. Das Motherboard-Layout kann je nach Modellen variieren, aber die Installationsschritte sind die gleichen. CPU Installation • Stellen Sie sicher, dass Sie nur die richtige CPU für LGA1200 Sockel installieren. Installieren Sie KEINESFALLS eine für LGA1155, LGA1156, und LGA1151 Sockel entworfene CPU auf dem LGA1200 Sockel.
Kapitel 2 2-2 Kapitel 2: Grundinstallation
2.1.2 Installation des Kühlsystems Falls erforderlich, tragen Sie die Wärmeleitpaste auf dem CPU-Kühlsystem und der CPU auf, bevor Sie das Kühlsystem installieren.
So installieren Sie einen AIO-Kühler Wenn Sie einen AiO-Kühler installieren möchten, empfehlen wir Ihnen, den AiO-Kühler nach der Installation des Motherboards in das Gehäuse zu installieren.
DIMM Installation Kapitel 2 2.1.
2.1.4 M.2 Installation 3 3 1 4 3 1 2 1 Kapitel 2 5 • Das M.2 Gummipad ist optional für die Installation eines einseitigen M.2 Speichergeräts. Stellen Sie sicher, dass Sie das mitgelieferte M.2 Gummipad anbringen, bevor Sie Ihr einseitiges M.2 Speichergerät installieren. • Bringen Sie NICHT die mitgelieferten M.2 Gummipads an, wenn Sie ein doppelseitiges M.2 Speichergerät installieren. Die vorinstallierte Gummiauflage ist mit doppelseitigen M.2 Speichergeräten kompatibel.
8 8 7 Kapitel 2 7 11 11 13 10 11 13 12 13 9 Das M.2 SSD ist separat erhältlich.
2.1.5 Zusätzliches Kühlset installieren Kapitel 2 2-8 • Wenn Sie während des Übertaktens Einstellungen für eine hohe Leistung verwenden wollen, stellen Sie sicher, dass Sie die Lüfterhalterung für zusätzliche Lüfter installieren. • Bitte überprüfen Sie die Kompatibilität des zusätzlichen Kühlsets mit Ihrem CPU-Kühlsystem, bevor Sie das zusätzliche Kühlset installieren, um eine Inkompatibilität zwischen beiden zu vermeiden. • Sie können 12V (1A, 12W), 40 mm x 40 mm Lüfter installieren.
2.1.6 Motherboard Installation Installieren Sie das Motherboard in das Gehäuse. Achten Sie hierbei darauf, dass die hinteren E/A-Anschlüsse genau auf die E/A-Blende in der Gehäuserückwand ausgerichtet sind. 2. Setzen Sie neun (9) Schrauben in die durch Kreise markierten Bohrlöcher ein, um das Motherboard im Gehäuse zu befestigen. Kapitel 2 1. Ziehen Sie die Schrauben NICHT zu fest! Sonst wird das Motherboard beschädigt.
2.1.7 ATX Stromversorgung Kapitel 2 ODER UND Stellen Sie sicher, dass Sie den 8-poligen Stromstecker anschließen.
2.1.
2.1.9 E/A-Anschlüsse auf der Frontseite So installieren Sie den ASUS Q-Connector So installieren Sie den USB 3.2 (Gen2) Anschluss USB 3.2 (Gen2) Kapitel 2 Dieser Anschluss passt nur in einer Richtung. Drücken Sie den Anschluss, bis er einrastet. So installieren Sie den USB 3.2 (Gen1) Anschluss So installieren Sie den USB 2.0 Anschluss USB 3.2 (Gen1) USB 2.
2.1.
So installieren Sie die Lüftererweiterungskarte Kapitel 2 Die Abbildungen in diesem Abschnitt dienen lediglich der Veranschaulichung. Das MotherboardLayout kann je nach Modellen variieren, aber die Installationsschritte sind die gleichen.
So installieren Sie die ThunderboltEX 3-TR Karte 6-poliger PCIe-Stromanschluss Der MiniDPEingang wird mit dem DP-Ausgang auf dem Motherboard oder einer VGA-Karte verbunden. Kapitel 2 Der USB Typ-CAnschluss verbindet Thunderbolt-Geräte. USB 2.0-Header Thunderbolt Header Stellen Sie sicher, dass die ThunderboltEX 3-TR Karte in einem PCIe-Steckplatz von PCH installiert ist. • Schritt 6 ist optional.
2.1.11 Installieren eines DIMM.2 • Der unterstützte M.2-Typ variiert je nach Motherboard. • Das M.2 SSD-Modul muss separat erworben werden.
12 16 11 15 14 • Vor dem Installieren oder Ausbau der DIMM.2-Karte muss die ATX-Stromversorgung ausgeschaltet oder das Netzkabel aus der Steckdose gezogen sein. Nichtbeachtung kann zu schweren Schäden am Motherboard und der DIMM.2-Karte führen. • Die DIMM.2-Karte ist eingekerbt und passt nur in einer Richtung hinein. Stellen Sie sicher, dass die Kerbe auf Ihrer Karte richtig am DIMM.2-Steckplatz ausgerichtet ist, bevor Sie die Karte einsetzen. • Das DIMM.2 Modul unterstützt das PCIe 3.
2.1.12 Installation der WLAN-Antenne Installieren der ASUS 2x2 Dualband WLAN-Antenne Schließen Sie die mitgelieferte ASUS 2x2 Dualband WLAN-Antenne an die WLAN-Anschlüsse auf der Rückseite des Gehäuses an. Kapitel 2 • Stellen Sie sicher, dass die ASUS 2x2 Dualband WLAN-Antenne fest an den WLANAnschlüssen installiert ist. • Stellen Sie sicher, dass sich die Antenne mindestens 20 cm entfernt von allen Personen befindet. Die oberen Abbildungen sind zu Ihrer Referenz.
2.2 BIOS Update Utility BIOS FlashBack Mit BIOS Flashback™ können Sie das BIOS mühelos aktualisieren, ohne das vorhandene BIOS oder Betriebssystem aufzurufen. Stecken Sie einfach ein USB-Speichergerät in den USB- Anschluss (der USB-Anschluss ist in grün auf der E/A-Blende markiert) und drücken Sie die BIOS Flashback™-Taste drei Sekunden lang, um das BIOS automatisch zu aktualisieren. So verwenden Sie BIOS Flashback™: 1. Stecken Sie ein USB-Speichergerät in den BIOS FlashBack™-Anschluss. 2.
• Trennen Sie während der BIOS-Aktualisierung nicht die mobile Disk, die Stromversorgung und drücken Sie nicht die CLR_CMOS-Taste, da der Vorgang sonst unterbrochen wird. Im Falle einer Unterbrechung folgen Sie bitte den empfohlenen Schritten noch einmal. • Falls die Anzeige für fünf Sekunden blinkt und danach dauerhaft leuchtet, bedeutet dies, dass die BIOS-Flashback™-Funktion nicht richtig ausgeführt wird.
2.3 Rücktafel- und Audio-Anschlüsse des Motherboards 2.3.1 Hintere E/A-Anschlüsse 2. CMOS Löschen-Schalter (CLR_CMOS). Drücken Sie diese Taste, um die BIOSSetupinformationen zu löschen, wenn das System wegen Übertaktung hängt. USB 2.0 Anschlüsse 7 und 8 3. USB 3.2 (Gen1) Typ-A Anschlüsse E7, E8, E9 und E10 4. Marvell AQtion AQC107 10 Gb Ethernet-Anschluss* 5. Intel I225-V Ethernet-Anschluss 6. BIOS Flashback-Taste 7. USB 3.2 (Gen1) Typ-A Anschlüsse E5 und E6 8. USB 3.
* LED-Anzeige des Marvell AQtion AQC107 10 Gb Ethernet-Anschlusses Aktivitäts-/Verbindungs-LED Speed LED Status Beschreibung Status Beschreibung AUS Nicht verbunden AUS Nicht verbunden GRÜN Verbunden GRÜN 10 Gb/s BLINKEND Datenaktivität ORANGE 5 Gb/s / 2,5 Gb/s / 1 Gb/s / 100 Mb/s Verbindung ACT/LINK LED SPEED LED LAN-Port ** Audio 2-, 4-, 5.1- oder 7.
2.3.
Anschluss von 4-Kanal-Lautsprechern Anschluss von 5.1-Kanal Lautsprechern Kapitel 2 Anschluss von 7.
2.4 Erstmaliges Starten 1. Bringen Sie nach Vervollständigen aller Anschlüsse die Abdeckung des Systemgehäuses wieder an. 2. Stellen Sie sicher, dass alle Schalter im ausgeschalteten Zustand sind. 3. Verbinden Sie das Netzkabel mit dem Netzanschluss an der Rückseite des Systemgehäuses. 4. Verbinden Sie das Netzkabel mit einer Steckdose, die einen Überspannungsschutz besitzt. 5. Schalten Sie die Geräte in folgender Reihenfolge ein: Überwachen b.
Kapitel 2 2-26 Kapitel 2: Grundinstallation
Kapitel 3: BIOS- und RAID-Unterstützung BIOS- und RAID-Unterstützung Weitere Informationen zu BIOS- und RAID-Konfigurationen finden Sie unter www.asus.com/support. 3.1 3 Kennenlernen des BIOS Das neue ASUS UEFI BIOS ist ein Unified Extensible Interface, das mit der UEFI-Architektur kompatibel ist und bietet eine benutzerfreundliche Oberfläche, die über das herkömmliche Tastatur-BIOS hinaus geht, um eine flexible und komfortable Mauseingabe zu ermöglichen.
3.2 BIOS-Setup-Programm Verwenden Sie das BIOS-Setup, um das BIOS zu aktualisieren und die Parameter zu konfigurieren. Die BIOS-Oberfläche enthält Navigationstasten und eine kurze Bildschirmhilfe, um Sie durch die Verwendung des BIOS-Setups zu führen. BIOS-Ausführung beim Startup Um das BIOS-Setup beim Start aufzurufen, drücken Sie oder während des Power-OnSelf-Test (POST). Wenn Sie oder nicht drücken, werden die POST-Routinen fortgeführt.
3.4 ASUS EZ Flash 3 Mit ASUS EZ Flash 3 können Sie das BIOS mühelos aktualisieren, ohne ein auf dem Betriebssystem basierendes Programm verwenden zu müssen. Stellen Sie sicher, dass Sie die BIOS-Standardeinstellungen laden, um Systemkompatibilität und Stabilität zu gewährleisten. Wählen Sie hierzu Load Optimized Defaults (Optimierte Standardwerte laden) im Exit-Menü oder drücken Sie .
3.5 ASUS CrashFree BIOS 3 ASUS CrashFree BIOS 3 ist ein Auto-Wiederherstellungs-Programm, das Ihnen erlaubt, die BIOS-Datei wiederherzustellen, falls sie versagt oder während der Aktualisierung beschädigt wurde. Sie können eine beschädigte BIOS-Datei über die Motherboard Support-DVD oder ein USB-Flashlaufwerk mit der aktuellen BIOS-Datei wiederherstellen. Die BIOS-Datei auf der Motherboard Support-DVD kann älter als die BIOS-Datei auf der offiziellen ASUS-Webseite sein.
3.6 RAID Konfigurationen Das Motherboard verfügt über die Intel Rapid Storage Technologie, die RAID 0-, RAID 1-, RAID 5- und RAID 10-Konfigurationen unterstützt. Weitere Informationen zur Konfiguration Ihrer RAID-Sets finden Sie im RAID-Konfigurationshandbuch unter https://www.asus.com/ support oder durch Scannen des QR-Codes.
Kapitel 3 3-6 Kapitel 3: BIOS-Setup
Anhang Anhang Q-Code-Tabelle 50 – 53 54 55 56 57 58 59 5A 5B 5C – 5F Beschreibung Nicht verwendet Einschalten. Bestimmung des Reset-Typs(soft/hard).
Q-Code-Tabelle Anhang Code E0 E1 E2 E3 E4 – E7 E8 E9 EA EB EC – EF F0 F1 F2 F3 F4 F5 – F7 F8 F9 FA FB – FF 60 61 62 63 – 67 68 69 6A 6B – 6F 70 71 72 73 – 77 78 79 7A – 7F Beschreibung S3 Resume gestartet (S3 Resume PPI wird von DXE IPL aufgerufen) S3 Boot Skript Ausführung Video umbuchen OS S3 wake vector call Reserviert für zukünftige AMI Fortschritt-Codes S3 Resume Failed S3 Resume PPI not Found S3 Resume Boot Script Error S3 OS Wake Error Reserviert für zukünftige AMI Fehler-Codes Recovery-Zustand, d
Q-Code-Tabelle Beschreibung Boot Device Selection (BDS) Phase wurde gestartet Treiberverbindung wurde gestartet PCI Bus Initialisierung wurde gestartet PCI Bus Hot Plug Controller Initialisierung PCI Bus Aufzählung PCI-Bus-Ressourcen anfragen PCI-Bus-Ressourcen zuordnen Konsolenausgabegeräte anschließen Konsoleneingabegeräte anschließen Super EA Initialisierung USB Initialisierung wurde gestartet USB Reset USB Erkennung USB aktiviert Reserviert für zukünftige AMI Codes IDE Initialisierung wurde gestartet ID
Q-Code-Tabelle Code B4 B5 B6 B7 B8– BF D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC Beschreibung USB hot plug PCI bus hot plug Aufräumen von NVRAM Konfiguration Reset (reset der NVRAM Einstellungen) Reserviert für zukünftige AMI Codes CPU Initialisierungsfehler System Agent Initialisierungsfehler PCH Initialisierungsfehler Einige der Architektur-Protokolle sind nicht verfügbar PCI Ressourcenzuordnungsfehler.
Hinweise Informationen zur FCC-Konformität Verantwortliche Stelle: Asus Computer International Adresse: 48720 Kato Rd., Fremont, CA 94538, USA Telefon- / Fax-Nr.: (510)739-3777 / (510)608-4555 Identifikation des gefertigten Produkts: INTEL WI-FI 6 AX201 Identifikation der modularen Komponenten in der Baugruppe: Modellname: INTEL WI-FI 6 AX201 FCC ID: PD9AX201NG Dieses Gerät entspricht Teil 15 der FCC-Vorschriften.
Entsprechenserklärung von Innovation, Science and Economic Development Canada (ISED) Dieses Gerät stimmt mit lizenzfreiem/lizenzfreien RSS-Standard(s) von Innovation, Science and Economic Development Canada überein. Der Betrieb unterliegt den folgenden zwei Bedingungen: (1) Dieses Gerät darf keine schädlichen Störungen verursachen, und (2) das Gerät muss empfangene Störungen akzeptieren, einschließlich Störungen, die einen unerwünschten Betrieb verursachen können.
Google™ Lizenzbedingungen Copyright© 2020 Google Inc. Alle Rechte vorbehalten. Unter der Apache Lizenz, Version 2.0 (die "Lizenz") lizenziert; Sie dürfen diese Datei nur in Übereinstimmung mit der Lizenz verwenden. Sie können eine Kopie der Lizenz erhalten, unter: http://www.apache.org/licenses/LICENSE-2.
Erklärung zur Erfüllung der Umweltschutzbestimmungen für das Produkt ASUS folgt dem Green-Design-Konzept, um unsere Produkte zu entwickeln und zu produzieren und versichert, dass jede Stufe des ASUS-Produktkreislaufs die weltweiten Umweltschutzbestimmungen erfüllt. Zusätzlich veröffentlicht ASUS die relevanten und auf den Bestimmungsanforderungen basierenden Informationen. Bitte beziehen Sie sich auf http://csr.asus.com/Compliance.
Das Motherboard NICHT im normalen Hausmüll entsorgen. Dieses Produkt wurde entwickelt, um ordnungsgemäß wiederverwertet und entsorgt werden zu können. Das Symbol der durchgestrichenen Mülltonne weist darauf hin, dass dieses Produkt (elektrische und elektronische Geräte) nicht im normalen Hausmüll entsorgt werden darf. Erkundigen Sie sich bei Ihren lokalen Behörden über die ordnungsgemäße Entsorgung elektronischer Produkte. Werfen Sie NICHT die quecksilberhaltigen Batterien in den Hausmüll.
Anhang Simplified EU Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/ EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/ The WiFi operating in the band 5150-5350MHz shall be restricted to indoor use for countries listed in the table below: Déclaration simplifiée de conformité de l’UE ASUSTek Computer Inc.
AT BE BG CZ DK EE FR DE IS IE IT EL ES CY LV LI LT LU HU MT NL NO PL PT RO SI SK TR FI SE CH UK HR ROG MAXIMUS XII EXTREME INTEL WI-FI 6 AX201 Ausgangsleistungstabelle: Funktion Frequenz Maximale Ausgangsleistung 2412 - 2472 MHz 18.62 dBm 5150 - 5350 MHz 19.15 dBm 5470 - 5725 MHz 18.92 dBm (EIRP) WiFi Bluetooth 5725 - 5850 MHz 9.25 dBm 2402 - 2480 MHz 10.51 dBm Für den Standard EN 300 440 V2.1.
ASUS Kontaktinformation ASUSTeK COMPUTER INC. Adresse 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan Telefon +886-2-2894-3447 Fax +886-2-2890-7798 Webseite https://www.asus.com Technischer Support Telefon +86-21-38429911 Online-Support https://qr.asus.com/techserv ASUS COMPUTER INTERNATIONAL (Amerika) Adresse 48720 Kato Rd., Fremont, CA 94538, USA Telefon +1-510-739-3777 Fax +1-510-608-4555 Webseite https://www.asus.