User's Manual

2-2 Chapter 2: BIOS Information
2.1.2 ASUS EZ Flash 2 Utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based
utility. Press <Enter> to launch the EZ Flash 2 screen.
Before you start using this utility, download the latest BIOS le from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB ash disk that contains the latest BIOS le to the USB port.
2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press <Enter>.
3. Press <Tab> to switch to the Drive eld.
4. Press the Up/Down arrow keys to nd the USB ash disk that contains the latest BIOS
then press <Enter>.
5. Press <Tab> to switch to the Folder Info eld.
6. Press the Up/Down arrow keys to nd the BIOS le then press <Enter> to perform the
BIOS update process. Reboot the system when the update process is done.
• This function supports USB ash disks formatted using FAT32 or FAT16 on a single
partition only.
• Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Optimized Defaults item under the Exit menu.
• DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!