User Guide

4. Using the Notebook PC

Secondary IDE (sub-menu)

This field is used to configure the secondary IDE drive installed in the system. To configure a hard disk

drive, select this sub-menu from the Main menu and press the Enter key to enter this sub-menu.

The fields and options on this sub-menu are the same as the previous menu described earlier. Set the

type as CD-ROM in this field to support an inserted CD-ROM or DVD drive module.

NOTE: After using the legend keys to make your selections in this sub-menu, press

the [Esc] key to return to the Main menu.

Item Specific Help

Secondary IDE [TOSHIBA DVD-ROM SD-C2402]

Type [Auto]

PIO Mode [4]

ULTRA DMA Mode [2]

<Enter> to select the

type of the IDE drive.

[User Type HDD] allows

you to set each entry on

your own.

WARNING: Ultra DMA mode

3/4 can be enabled only

when BIOS detects

shielded 80-pin cable.