User's Guide

Using the onboard display output ports

Connect your monitor to the onboard display output port.

To connect an external monitor using the onboard display output ports:

1. Connect a VGA monitor to the VGA port, or a DVI-D monitor to the DVI-D port, or an HDMI

monitor to the HDMI port on the rear panel of your computer.

2. Plug the monitor to a power source.

• IfyourcomputercomeswithanASUSGraphicsCard,thegraphicscardissetastheprimary

display device in the BIOS. Hence, connect your monitor to a display output port on the

graphics card.

• Toconnectmultipleexternalmonitorstoyourcomputer,refertoConnecting multiple

external displays in Chapter 2 of this manual for details.

18 Chapter 1: Getting started

ENGLISH