Specifications

Chapter 2: BIOS information 2-27
2.7.3 Post Delay Time [3 sec]
Allows you to set the POST Report wait time. This conguration only functions in Normal
Boot mode. Conguration options: [0 sec] [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec]
[8 sec] [9 sec] [10 sec]
2.7.4 Bootup NumLock State [On]
[On] Sets the power-on state of the NumLock to [On].
[Off] Sets the power-on state of the NumLock to [Off].
2.7.5 Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Conguration options: [Disabled] [Enabled]
2.7.6 Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
2.7.7 Interrupt 19 Capture [Postponed]
[Immediate] Immediately capture Interrupt 19 during boot process.
[Postponed] Postpone capture of Interrupt 19 during boot process.
2.7.8 Setup Mode [EZ Mode]
[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
program.
[EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program.