User Guide

ASUS A7A133 User’s Manual

3. HARDWARE SETUP

2) Voltage Regulator Output Setting (VID)

This jumper allows you to manually adjust the CPU core voltage. It is better to

use the CPU Default for the CPU core voltage. CPU Default means the Vcore

is generated according to the CPU VID configuration. Disabling the Voltage

regulator output allows higher voltage settings to be made; however care must

be exercised not to damage the CPU.

A7A133

A7A133 VID Selection

Enable

(Default)

VID

Disable

3) Bass Center Setting (BCS1, BCS2)

Use these jumpers in conjunction with the C-Media PCI Audio Driver to adjust

output for 6 speaker audio. No audio standard exists for the three pick-up

surfaces on male audio jacks, therefore it may be necessary to switch jumpers

from the default position to reroute signals among the internal leads to the Line-

In, Line-Out, Mic female sockets. Make sure a test is made using the C-Media

Audio Driver software setup available on the Support CD. These jumpers

effectively swap the audio channels for bass and center.

A7A133

A7A133 Bass Center Setting

(CENTER/BASS)

BCS1

BCS2

(BASS/CENTER)

(Default)

BCS1

BCS2

Motherboard Settings

3. H/W SETUP