User Guide

ASUS A7N8X-XE Motherboard 1-21
7. Front panel audio connectors (10-1 pin FP_AUDIO)
This connector is for the front panel audio cable. This connector supports the
front panel audio I/O ports.
A7N8X-XE
®
A7N8X-XE Front panel audio connector
FP_AUDIO
BLINE_OUT_L
MIC2
Line out_R
Line out_L
BLINE_OUT_R
NC
MICPWR
+5VA
AGND
8. ATX power connector (20-pin ATXPWR)
This connector is for the 20-pin ATX power supply plug. The plug from the
power supply is designed to fit this connector in only one orientation. Find the
proper orientation and push down firmly until the connector completely fit.
If you will need to replace the power supply in the future, make sure that your
new ATX 12V power supply can provide 8 A on the +12 V lead and at least 1
A on the +5 V standby lead (+5VSB). The minimum recommended wattage is
230W, or 300W for a fully configured system. The system may become unstable
and may experience difficulty powering up if the power supply is inadequate.
A7N8X-XE
®
A7N8X-XE ATX power connectors
ATXPWR
+3.3VDC
-12.0VDC
GND
PS_ON#
GND
GND
GND
-5.0VDC
+5.0VDC +5.0VDC
PWR_OK
+12.0VDC
+3.3VDC
+3.3VDC
GND
+5.0VDC
GND
+5.0VDC
GND
+5VSB